ROCK HAMMER
from American Science & Surplus
- Pick Pick, Chip Chip Rock hammer with one square chipping face and one pointy picking face. Steel head and shank, molded rubber grip. Taiwanese. 1 ft. long x 6" across the head 1-1/2 lbs. Well made. Good buy. Good bye!
Pick Pick, Chip Chip Rock hammer with one square chipping face and one pointy picking face. Steel head and shank, molded rubber grip. Taiwanese. 1 ft. long x 6" across the head 1-1/2 lbs. Well made. Good buy. Good bye!
Pro Series Unbreakable Composite Trowel for Metal Detecting
from Fiskars
- Lifetime Guarantee - If you can break it, we will replace it!
- Unbreakable composite construction
- Sometimes you just need a light weight trowel!
- Sturdy design for easy digging
Possibly the last trowel you will ever need to add to your collection of metal detecting gear. Great for treausre hunting on the beach, sifting through sand, or digging in loose soil. The Pro Series Unbreakable Composite Trowel is a great addition to any treasure hunter's arsenal of tools. The trowel is made of a plastic composite, so you can run your search coil over the trowel without interference. Unbreakable composite construction Sturdy design for easy digging Lightweight If you can break it, we will replace it!
3/4" x 11 Hard Cap Star Drill
from Baltimore Tool Works, Inc
- Tough Reinforced Polymer Cap for Safety
- Reduces More Than 80% of Sound & Vibration
- Larger striking surface provides hand protection
- No metal-to-metal contact
Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
Bon Tool Co. Nylon Concrete Fibers
from Bon Tool Co.
- Exceeds ASTM C-1116-95 specifications
- Recommended dosage is 1lb. per cubic yd. of conrete
Rose Narrow London Pattern Brick Trowel 12" blade, 6" standard shank wood handle
from W. Rose
- Narrow London Pattern Brick Trowel 12" blade, 6" standard shank wood handle
- Heel Width: 5
Narrow London Pattern Brick Trowel 12" blade, 6" standard shank wood handle
Bon Tools 11-140 Bricklayer's Line Twigs (12 per pkg)
from Bon Tools
- Quickly snaps completely around line
- Made from Spring Steel
- Coated to prevent rusting
Quickly snaps completely around line. Made from spring steel. Coated to prevent rusting. 4" Length, 1/2" Width, Sold in package of 12
Stone Mason's Chisel, 8" x 2 1/4"
from Marshalltown
- This carbide tipped chisel has a two sided angled carbide design for splitting stone
- It has a 3-4 to 2-1/4 wide blade with a hex body
- The high quality tungsten carbide tip is designed for use on granite or other hard stone
- Sharpening the carbide regularly will allow for long life of the chisel
- This versatile chisel can also be used for shaping stone
Thin, strong, forged steel blade assures clean, crisp cuts. Applications: use for cutting concrete block, cinder block, brick, and veined stones such as Arizona or Crab Orchard.
Custom Building Prod. CTTSGQT Simpleset Pre-mixed Tile And Stone Thin-set Mortar
from Custom Building Prod.
- This no-mix, no mess alternative to traditional thin-set mortars spreads quickly and easily
- Bonds porcelain, stone, marble, granite and ceramic
- Tile up to 18" x 18" (45cm x 45cm)
- For interior wall and floor installations
- Protected by Moldguard technology to resist mold and mildew growth
No mixing and no mess alternative to traditional thin set mortars spreads quickly and easily. Bonds to ceramic tile and quarry tile up to 18" x 18" (45 x 45 cm). For interior wall and floor installations. Suitable for wet areas such as tub surrounds and s
Bon Tool Co. Paver Extracting Tongs
from Bon Tool Co.
- Removes a single paver that has been in place for a long time
- Adjustable jaws can be reset quickly to accommodate most stone shapes and sizes
- Serrated tempered steel blades
- 11" maximum opening
Use these tongs for removing a single paver that has been in place for a long time. The adjustable jaws can be reset quickly and easily to accommodate most stone shapes and sizes. Serrated tempered steel blades. Paver Tongs
1" Carbide Hand Chisel
from Trow and Holden Company
- Traditional carbide hand chisel for use on granite and softer stone.
- Highest quality carbide blade lasts and lasts.
- Use for roughing out, shaping and lettering in stone.
- Maintains its shape to save you time and money.
- Use with Trow & Holden Hand Hammer or Round Hammer.
The traditional styling of this chisel makes it perfect for removing material, shaping and lettering by hand in granite or other hard stone. The superior carbide tip means this chisel will maintain its shape for much longer, which saves you time and money. Always wear safety glasses.
+++
Bosch 11236VS Factory Reconditioned 1-1/8 inch 3-Mode SDS Plus Rotary Hammer, 0-850 RPM, 7.5 Amps
The Bosch 11236VS is a factory reconditioned 1-1/8 inch 3-Mode SDS plus rotary hammer. The 7.5 Amps hammer runs on a variable-speed 0 to 850 RPM motor with 0 to 3900 BPM. The hammers Vario-Lock positioning enables the user to rotate and lock the chisel into 36 different positions to optimize the working angle. The unit features 3 operational modes for versatility hammer only, for light chipping applications with chisels; rotation only, for drilling wood, steel and building materials with optional chuck; and hammer/rotation, for drilling concrete, brick, stone and masonry. The tools maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, 1-1/4 inches in woodland 4 inches in thin-wall core bit. It includes 360 auxiliary handle, depth gauge and carrying case.
