Marking Tools

FastCap Accuscribe Scribing Tool

The Accuscribe from FastCap scribes cabinet trim, architectural moldings, countertops, tile and more for cleaner cuts and more creative freedom on a wide variety of projects. The Accuscribe maintains consistent scribe offset and stays parallel to surfaces as you mark out the pattern or cut-- a great feature for installing splash guards, cutting tile, and designing floors. The device's adjustable grip locks standard-size pencils tightly in place. The AccuScribe is made of heavy-duty, indestructible polymer for years of reliable use. The unit's articulating pencil head increases flexibility for scribing over a wide variety of materials and textures. A removable compass point makes it easy to scribe circles and circular patterns. A handy storage clip for the compass point ensures optimal safety and longer compass life. The AccuScribe's non-rocking bottom keeps the unit flat against the surface or wall for flush contact with the pencil tip. The tool collapses to a compact size to take up less room in the toolbox. The Accuscribe measures 5-3/4 by 4-13/16 inches when fully extended (length by height). --Brian D. Olson

Incra T-RULE06 6-Inch Precision Marking T-Rule

Precise, versatile, and easy-to-use are the words which best describe the Incra 6-Inch Precision Marking T-Rule. Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy. There are micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position to instantly locate your sharp pencil or scribe exactly on target with zero uncertainty. The Incra T-Rule makes it very easy to draw exact lines in either direction, and with zero uncertainty and no eye strain. Other features include 0- to 3-inch height markings on the end in 32nds, and the option of marking holes every 1/100-inch. The product also comes with a limited 1-year warranty.

Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig

Crown Molding Cutting Jig - CROWN MOLDING CUTTING JIG. Produces perfect fitting miters every time. Crown stop quickly adjusts to lock molding. Fits all 10" & larger miter saws

There's no denying that nearly everyone loves crown molding, but cutting the molding is no picnic—even for some pros. That's because crown molding gets installed at an angle against the wall and ceiling, and precise cuts are required to obtain tight-fitting corner joints. Complicating the situation is the fact that crown molding is expensive; it only takes two or three miscuts to blow your budget. But don't despair you can end the trepidation and frustration with the Bench Dog 10-010 Crown-Cut Jig. This surprisingly simple device provides a quick, foolproof way to cut crown molding, even for novice do-it-yourselfers.

Crown-Cut is designed to work with any 10-inch or larger power miter saw, and it'll accommodate crown moldings up to 6 inches wide. The jig is made of Baltic birch plywood and it plastic stops and steel tabs that adjust to match the molding's height and distance it projects from the wall.

To use the jig, simply set it onto the saw table and adjust it to match the molding size. Then place the molding into the jig and it'll automatically be held at the proper wall angle. Set the saw blade to 45 degrees, and make the cut. This method is much easier than holding the molding flat on the table and setting the saw for a compound angle cut, which requires figuring out both bevel and miter angles. -- Joseph Truini

Incra T-RULE12 12-Inch Precision Marking T-Rule

Precision Marking Rule

Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule. Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy. There are micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position to instantly locate your sharp pencil or scribe exactly on target with zero uncertainty. The Incra T-Rule makes it very easy to draw exact lines in either direction, and with zero uncertainty and no eye strain. Other features include 0- to 3-inch height markings on the end in 32nds, and the option of marking holes every 1/100-inch. The product also comes with a limited 1-year warranty.

Incra PROTRAC06 6-Inch Precision Marking Protractor

The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking protractor has micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. It's easy on the eyes, incredibly accurate, and just plain fun to use.

STRIKER Construction Pencil with DURA LEAD combo pack

Striker Mechanical Carpenter Pencil and Dura Lead combo pack. Pack includes one Striker and 5 pieces of Dura Lead replacement lead in a rugged storage tube. No more sharpening! Throw away those worthless carpenter pencil sharpeners, toss your old and broken two inch long tradtitional pencil and step into the 21st century. The STRIKER is rugged, efficient and revolutionary. Dura Lead is thicker than traditional lead and works on most construction materials. Quickly shape the lead and get closer to a speed square than any other pencil and still have a strong, razor sharp tip. Never sharpen a pencil again!

Malco FCG2 1-1/4 Inch Overlap 5/16-Inch Thickness Fiber Cement Siding Gauge, 2-Pack

Sharpie 35010-SH Bulk 36 Piece Canister Black

This Sharpie Bulk 36 Pack is great for the contractor. You get 36 of the fine tip sharpie which is great for marking on those hard to mark surfaces. This Sharpie can mark on rough wood, glass, foil, aluminum, metals, copper, coated paper, and most plastics. How do you use your Sharpie?

Malco FCMS 5-Inch to 8-Inch Exposure Facing Gauge and Overlap Gauge Set

"MALCO PRODUCTS, INC. " SIDING TOOL Use while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging May also be used in combination with the Malco overlap gauge to prop up one end of the plank for one-person application More accurate and easier to use than home-made wood "preacher" blocks Adjustable for precise 5", 6", 7", or 8" exposures Gauging block easily snaps in to desired exposure position without use of tools or fasteners Easily held with one hand while steadying new plank for nailing May be used with Overlap Gauge for 1-person application Manufactured of tough, long-lasting, weather-resistant nylon material throughout Carded

The Malco FCMS Facing Gauge and Overlap Gauge Set offers two popular tools for fiber cement siding -- a facing gauge and an overlap gauge. The fiber cement facing gauge is used to accurately measure the exposure of the siding and guard against sagging, it can be set to exposures of 5, 6, 7, and 8 inches. This facing gauge is easily adjusted without the need of tools or fasteners, and it can be held with one hand when steadying a new plank for nailing. The facing gauge is made of tough, long-lasting, weather-resistant nylon. The metal overlap gauge is used to support one end of a plank and give it the proper overlap, a pair of overlap gauges can be used to support the entire plank if desired. This overlap gauge can be removed without damage to the siding. When used in combination, the facing gauge and overlap gauge allow you to prop up one end of the plank for easy and accurate 1-person installation of fiber cement siding.

TileRight TR0004 Measure Right Pro 10-Inch to 17-Inch Tile Setter Template