Cast Iron Rotary Pump For Oil And Petroleum Products
from MTN PRODUCTS DIVISION OF NATIONAL SPENCER, INC.
Cast Iron Rotary Pump Easy to operate, just turn crank handle. To use as a siphon, prime pump by turning crank handle several times: liquid automatically siphons to lower level. Used for light oil and petroleum products. Dispenses 8 oz. per revolution. Fits 15, 30 and 55 gallon drums. Cast iron body with heavy duty cast iron vanes. 3 piece steel suction pipe 1-14"dia. x 40"L, strainer and 34" threaded discharge spout. Includes 2" bung adapter. Optional Drip Tray returns spills into drum, reducing waste and cleanup. Complete with hinged cover.
Prince PTO Tractor Pump 21 GPM, Model# HC-PTO-1A
from Prince
- GPM: 21
- RPM: 540
- Diameter/Spline: 1 3/8in. / 6-Spline
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
12 Ton Hydraulic Shop Press
from Generic
-Powered by a strong 12-ton hydraulic bottle jack. -Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys, etc. Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up your work. Get tremendous pressure with very little effort for all your arbor and press out jobs. DONT WANT TO PAY FOR SHIPPING and live in Southern California? This item is available for pick up!!! Email us at Prolinetrading@sbcglobal.net and ask how?!
Ryton Rotary Pump For Aggressive Chemicals
from MTN PRODUCTS DIVISION OF NATIONAL SPENCER, INC.
Rotary Drum Pump - Ryton Ryton construction with ryton vanes, viton oil seal and teflon flange gaskets. Used for aggressive chemicals such as chlorinated solvents and hydrocarbons. Not recommended for ketones and ethers and very strong oxidizing agents in concentrated form. Dispenses 8 oz. per revolution. Includes 2" bung adapter, 3 piece 14"dia. x 44"L suction tube with strainer and 1" discharge spout.
Hypro D403 Diaphragm Kit 9910-Kit2423
from hypro-diaphragm-pumps
- Hypro kit 9910-Kit2423.
- Replaces diaphragms on the Hypro D403.
- Includes 3 diaphragms (Desmopan, 9910-800085).
The Hypro diaphragm repair kit 9910-Kit2423 is used to replace worn or damaged diaphragms on the Hypro D403 diaphragm pump. When the fluid in the oil sight glass turns a milky gray color it means that one (or more) of the diaphragms has ruptured and the fluid to be pumped is mixing with the oil in the crank case. If this happens to your D403, you will need to purchase the diaphragm repair kit Kit2423.
Heavy-Duty 10-Ton Hydraulic Air - Foot Auxiliary Pump
from RRT
- Heavy-duty pump for porta-power, frame/body straighteners, presses, jacks & other hydraulic tools
- Fits all standard and long-ram hydraulic equipment; foot-pump or connect to air supply for faster r
- Operates in all directions for increased versatility and mounting options; reservoir mounting slots
- Swivel coupling simplifies connection; 3-position treadle for advance, hold or retract operation
- Rugged all-steel construction for long life and easy service; relief valve overload protection
Operates at 70-170 PSI to develop up to 10,000 PSI, maximum output 20,000 lbs. Average air consumption 10 CFM; air inlet 1/4" NPT, includes 6' hydraulic hose with fitting; 21 lbs. Stroke length 1", oil flow at 100 PSI 30 cu in/min; usable oil capacity 42 cu in (690cc). One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee.
Hypro D30 Diaphragm Kit 9910-Kit1724
from hypro-diaphragm-pumps
- Kit 9910-Kit1724 replaces diaphragms on the Hypro D30 pump.
- 2 diaphragms (Desmopan, 9910-620085).
- 1 accumulator diaphragm (Buna-N, 9910-550190).
- 4 o-rings (9910-620030).
The Hypro diaphragm repair kit 9910-Kit1724 is used to replace worn or damaged diaphragms on the Hypro D30 diaphragm pump. When the fluid in the oil sight glass turns a milky gray color it means that one (or more) of the diaphragms has ruptured and the fluid to be pumped is mixing with the oil in the crank case. If this happens to your D30, you will need to purchase a diaphragm repair kit: Kit1724 includes 2 Main Diaphragms (Desmopan), 1 Accumulator Diaphragm (Buna-N), and 4 O-Rings. The O-Rings are used to replace those rings that may have absorbed chemical due to the rupture.
Haldex Cast Iron Hydraulic Gear Pump 2.6 Cu. In., Model# 2102725
from Haldex
- Cubic Inch Size: 2.60
- Rotation: CW
- Flow at 1800 RPM: 20.2 GPM
- Flow at 3600 RPM: 40.4 GPM
- Maximum PSI: 4000
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A
Hypro Diaphragm Pump D252GRGI
from hypro-diaphragm-pumps
- Performance: 6 gpm, 290 psi, 2800 rpm max. rated speed.
- Ports: 3/4" HB inlet, 3/8" HB outlet from pump, 5/8" HB bypass outlet from regulator.
- Shaft: 3/4" hollow shaft output (gear reduced for 2-3.5 hp gas engine), accepts 3/4" solid shaft.
- Includes control unit (9910-Kit1990)
- Oil-level sight glass.
The Hypro Diaphragm Pump D252GRGI is comprised of a D252 pump, regulator, and gear box that accepts a 3/4" solid shaft from an engine (has a 3/4" hollow shaft). The gearing on this pump assembly is such that it can be used with a 2-3.5 hp gas engine.
Hypro GS40GI Regulator
from hypro-diaphragm-pumps
- 9910-GS40GI mounts on D30 and D50 pumps by Hypro.
- Max. Flow Rate: 21 gpm.
- Max. Pressure: 580 psi.
- Outlets: (2) 1/2" NPT with individual valves.
The GS40GI control unit is a pressure regulator for Hypro D30 and D50 pumps. This device features two valve-controlled outlet ports, a bypass lever, and pressure gauge in addition to the high pressure relief valve.
+++
Roll Cage for IPT Pumps
New Intek engines require larger roll cages. Fits the following Item#s: 10997, 10998 and 109970.
Tuthill Rebuild Kit for Rotary Hand Pumps
Designed for Tuthill rotary hand pumps Item#s 10955 and 109574. Includes 3 vanes, 3 vane springs and 3 pins, vacuum breaker, gasket, seal, O-ring, screen and inlet gasket, plus instructions. U.S.A.
Sandpiper 55 Gallon Drum Transfer Kit for Sandpiper Pumps
Converts Sandpiper 1/4in. and 1/2in. pumps to evacuate closed-head 55-gallon drums. Includes PVC fittings, 2in. bung adapter and siphon tube. U.S.A.
Brand Hydraulics Adjustable Pressure Compensated Flow Control Valve — 1in. NPT ports, 0–50 GPM, Model# PFC51-1
Brand Hydraulics adjustable pressure compensated flow control valve manually controls the speed of a hydraulic motor up to 3000 PSI working pressure. Controlled flow remains constant regardless of load variation. Valve is field convertible from 3- to 2-port configuration by plugging the excess port for pressure compensated pumps. U.S.A. Port Size (in.): 1 NPT, Max. Flow (GPM): 50, Max. PSI: 3,000
Brand Hydraulics Adjustable Pressure Compensated Flow Control Valve — 1 1/4in. NPT ports, 0–90 GPM, Model# PFC51-1 1/4
Brand Hydraulics adjustable pressure compensated flow control valve manually controls the speed of a hydraulic motor up to 3000 PSI working pressure. Controlled flow remains constant regardless of load variation. Valve is field convertible from 3- to 2-port configuration by plugging the excess port for pressure compensated pumps. U.S.A. Port Size (in.): 1 1/4 NPT, Max. Flow (GPM): 90, Max. PSI: 3,000
Tsurumi Pumps Replacement Float Switch
Fits #108200 and #10980.
Delavan Cast Aluminum Coupler with Nylon Collar for #8800 Series Pumps, Model# 46814-3
Multispeed coupler compatible on #8800 series pumps. Durable, versatile and convenient quick-coupler for use with both 540 RPM and 1000 RPM 1 3/8in. PTO drives. U.S.A. 1-year limited warranty.
Delavan Cast Aluminum Coupler with Nylon Collar for #6600 Series Pumps, Model# 46814-1
Multispeed coupler compatible on #6600 series pumps. Durable, versatile and convenient quick-coupler for use with both 540 RPM and 1000 RPM 1 3/8in. PTO drives. U.S.A. 1-year limited warranty.
"Tsurumi Pumps Submersible Water Pump — 3810 GPH, 1/2 HP, 2in., Model# LB4-80"
"Compact; excellent motor cooling efficiency. Allows continuous duty operation at low water levels, plus extended dry run capability. V-ring system protects shaft seal from abrasives. Silicon carbide-faced mechanical seal. 2in. discharge bore. Includes 32ft. cable. Not for use in fish ponds. 1-year limited warranty.110 Volt, 5.4 Amp motor has built-in protector39 1/2ft. Total Head Pumps down to 3 1/2in. Rubber Impeller Surge Amperage: 30.5 Continuous Amperage: 6.11-year limited warrantyModel LB4-80"
Tsurumi Pumps Submersible Water Pump — 3810 GPH, 1/2 HP, 2in., Model# LB4-80
Compact; excellent motor cooling efficiency. Allows continuous duty operation at low water levels, plus extended dry run capability. V-ring system protects shaft seal from abrasives. Silicon carbide-faced mechanical seal. 2in. discharge bore. Includes 32ft. cable. Not for use in fish ponds. 1-year limited warranty. Flow (GPH): 3,810, Volts: 110, Amps: 5.4, Max. Total Head (ft.): 39.5, Impeller Shaft: Rubber, Seals: Silicon Carbide-Faced Mechanical, Power Cord (ft.): 32 Motor has built-in protector Pumps down to 3 1/2in. Surge Amperage: 30.5 Continuous Amperage: 6.1 Model LB4-80
