Transfer Switches

Reliance Controls Transfer Switch Kit - 6 Circuit, Model# 31406CRK

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

Reliance Controls PB30 30 Amp Power Inlet Box

The Reliance Controls 30 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit includes an NEMA L14-30P inlet plug, six knockout holes, and push-in wire connections. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty.

GenTran 14302 30 Amp Aluminum Power Inlet Box for up to 7,500-Watt Generators

You can avoid running generator cords through a door or window with the GenTran 30 Amp aluminum power inlet box. If your electrical panel is in the basement or an interior room, you'll need to mount this power inlet box on the exterior of your house or building and hardwire to transfer switch. You can connect generators up to 7,500 watts to this power inlet box during an outage. Constructed of rust-free aluminum, this box is rain-tight even when the cord is connected. The NEMA 3R-rated aluminum enclosure won't rust and it includes a NEMA L14-30 male inlet. It comes with a 2-year limited warranty.

GenTran 301660 30 Amp 6-Circuit Transfer Switch for up to 7,500-Watt Generators

The GenTran 30 Amp 6-circuit automatic transfer switch for up to 7,500-watt generators includes everything you'll need to install a generator transfer switch for safe, convenient portable generator hookup. This kit includes a prewired 6-circuit transfer switch. Power up your essential circuits using a 5,000-watt generator (continuous watts) during a power outage or emergency. It accommodates 6-to-10 household circuits like your furnace blower (gas only), refrigerator and kitchen circuits, well pump, lights, and television. If your needs change, your installer can easily expand this transfer switch to up to 16 circuits just by adding more circuit breakers. The enclosure can be surface mounted indoors, and allows hardwired or plug-in generator connections. Because it was designed with off-the-shelf circuit breakers you don't have to search high and low for replacements, and your installer can reconfigure the breaker combinations to suit your family's needs.

This transfer switch features a dual watt meters to help you balance generator loads to prolong generator life. The kit comes with two 15 Amp 1-pole breakers, two 20 Amp 1-pole breakers, and one 2-pole 20 Amp breaker. A 60 Amp 2-pole main breaker is required in existing load center (not included). This kit comes with a 2-year limited warranty.

Reliance Controls PB20 20 Amp Power Inlet Box

The Reliance Controls 20 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit features zinc-plated steel construction. It includes an NEMA L14-20P inlet plug, six knockout holes, and push-in wire connections. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty.

Reliance Controls PB50 50 Amp Power Inlet Box

Power inlet box is wired to your indoor load center and mounted to an exterior wall near where generator is running. Power cords are plugged from generator directly to power box, eliminating running power cords through an open window to load center. NEMA 3R-rated all-steel construction and weatherproof gasketed spring-closure door for outdoor mounting. 4 knockout holes and ample wiring space for easy connections. UL listed. 5-year limited warranty. U.S.A.

The Reliance Controls 50 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit works with generators working at 12,500 watts. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty.

GenTran 301060 PowerStay 30 Amp Manual Transfer Switch

The Gen/Tran PowerStay manual transfer switch is a highly versatile switch designed for 10 circuits, 30 amps, and generators up to 7,500 watts. Plus, as your family or business needs change, this product can expand up to 16 circuits, increasing its range of use. The cabinet can be conveniently flush or surface mounted indoors, and the design accommodates either hardwiring to a generator or installing via a plug-in cord. The standard branch circuit breakers make for easy replacement and expansion, allowing you to reconfigure the product to suit your needs. Housed in a NEMA 3R-rated aluminum cabinet, this transfer switch features a L14-30 male power inlet. Included in the design are three 15 Amp 1-pole breakers, three 20 Amp 1-pole breakers, one 2-pole 20 Amp breaker and one 2-pole 30 Amp breaker for your water heater; the transfer switch accepts Arc Fault and GFCI breakers. To use this transfer switch, a 60 Amp main breaker must be installed in the existing load center. This product is listed to UL standard 1008.

Briggs & Stratton 1918 50 Amp Automatic Transfer Switch with 12 Pre-Selected Breakers

Designed for reliability against back feeding to the utility lines during an outage, the Briggs & Stratton 50 Amp automatic transfer switch features 12 pre-selected breakers and is able to supply power to all circuits of your home or small business while automatically managing critical loads. Custom made exclusively for Briggs & Stratton Power Products standby generator systems, the switch reduces the overall energy cost by giving you the power you need exactly when you need it. The switch is adequate for either indoor or outdoor installation for added versatility.

Reliance Controls TRC1006D 60-100 Amp Utility Subpanel for up to 15,000-Watt Generators

For generators up to 15,000 Watts and utility input of 100 Amps, this panel can be used as a smaller main panel for a home or cabin, or as a subpanel for a larger building. Interlinked circuit breakers keep the generator isolated from the utility at all times. Accommodates 12 to 20 common circuit breakers to control a variety of appliances and devices. Heavy-duty steel cabinet with steel door covering circuit breakers. Indoor surface or flush-mount design. UL listed. 5-year limited warranty. U.S.A. Factory shipped.

The Reliance Controls 60-100 Amp utility subpanel is designed for use with generators running up to 15,000 watts. It features interlinked circuit breakers that keep the generator isolated from the utility at all times, even with the cover or deadfront removed. It is service entrance rated and may be used as a main panel or a sub-panel. This unit comes without a power inlet or wattmeter. It is UL listed and covered by a 5-year warranty.

GenTran 501210 Powerstay 12-Circuit 50 Amp Transfer Switch for up to 12,500-Watt Generators

When power is out and you need a generator to keep your lights, refrigerator, furnace and microwave running, the Gen/Tran Switch is a real home saver! Individual circuit protection. Wattage meters for balancing your load requirements. Wiring harness with 24in. of flexible conduit. Required main breaker in load center: 50 Amp. Consult a qualified electrician. 14 3/8in. W x 11 1/2in. L x 3 3/8in. D. UL listed. U.S.A.

The GenTran Powerstay 50 Amp 12-circuit transfer switch for up to 12,500-watt generators allows for hardwired or plug-in generator connections. It can be flush mounted or surface mounted indoors, and includes a 50 Amp 4-wire twistlock male inlet and dual wattmeters to help balance generator loads. Three 15 Amp 1-pole breakers, three 20 Amp 1-pole breakers, one 2-pole 20 Amp breaker, one 2-pole 30 Amp breaker, and one 2-pole 50 Amp breaker are included. This switch requires installation of a 100 Amp main breaker in your existing load center. GenTran backs its switch with a 2-year limited warranty.