Recessed Lights

Halo Shower Light, White # 951PS

Sold as each. 5" diameter. 4" shower trim with lens. Uses 40W A19, 50W PAR20, 50W R20 bulb. Use with the following "Halo" recessed housing: H99T (SKU # 3037348). Bulk. Manufacturer's number: 951PS. Country of origin: China. Distributed by Cooper Lighting.

Use this product when installing Halo's H99T, H99RT, and H99ICT downlighting fixtures above shower stalls. It's wet-location listed, and the polymer trim is non-conductive and non-corrosive. The pebble-finish glass lens and full-reflector baffle give you a nice, even light for your morning shower. Note that you can purchase an optional socket extender (#H1999) if you want to use a 50-watt PAR20 bulb with this trim.--Josh Dettweiler

What's in the Box
Shower light (baffle and trim)

Halo 6-Inch Air Tite IC Recessed Light Housing #H7ICTNB

This is the housing to use if you want a larger-aperture (six inches) lighting solution for installation in insulated ceilings. The H7ICTNB also gives you the added convenience of no-socket-plate construction, which saves time (and labor cost) because you don't have to remove the socket and socket plate to install the fixture. In addition, the wide variety of trims available with this model allow you to customize the unit to match your décor, finish, and desired lighting effects (and, if you wish, make the unit air-tight).

Like most of Halo's recessed lighting fixtures, the H7ICTNB is designed for ease of installation and flexibility across a variety of materials and situations. The hanger bars include pre-installed nails (self-tapping screws are also available) in special housings that ensure smooth, straight penetration, whether you're working with laminated composites, engineered I-joists, open-web joist plates, or even frozen lumber. The automatic leveling flanges allow you to hold the housing securely in place with one hand while driving nails with the other. The housing also includes integral T-bar clips for use with suspended ceiling T-grid systems.

Halo also makes it easy to work in confined spaces. To install in joist spans of less than 12 inches, simply collapse the hanger bars then bend and break them along the score lines--no tools needed. The bars can also be removed and repositioned on the opposite side of the frame if you need to mount the unit at 90 degrees to the original configuration. Wiring is a breeze with Halo's patented Slide-N-Side wiring system, which allows wiring outside the junction box.

Trims sold separately. UL/cUL listed for damp location, feed through, and direct contact with insulation and combustible material.--Josh Dettweiler

What's in the Box
Six-inch-aperture housing

Halo 5-Inch Air Tite Recessed Light Housing #H5ICAT

One problem with recessed light fixtures is that they can undermine all the hard insulating work you've done by allowing warm air to leak into your attic. The H5ICAT from Halo is designed to eliminate this problem: its trademark "Air-Tite" housing prevents airflow between the attic and living spaces. The housing itself is insulated, which means that you can cover it with insulation without risking a fire. And it looks good, too--the five-inch aperture is both elegant and inconspicuous.

The H5ICAT allows for a variety of situations particular to your construction site. It can be positioned at any point within a 24-inch joist span, and score lines are provided to facilitate field-shortening for 12-inch joists. The junction box is approved for through-branch circuit wiring and has seven 1/2-inch knockouts with true pry-out slots. The housing may be adjusted for ceilings of up to one-inch thick.

The housing also features preinstalled nails for easy installation, and it includes an automatic leveling flange that lets you align the housing and hold it in place with one hand while securing to joists. For safety, the unit includes a thermal protector that deactivates the fixture if it overheats. Available with a variety of trim options (sold separately). UL/cUL listed. --Josh Dettweiler

What's in the Box
Five-inch-aperture housing, "Air-Tite" gasket

Halo 4-Inch Eyeball Light Trim, White #998P

5 1/16" diameter white trim for use with 4" incandescent rounds. Non-insulated or insulated housings. Use PAR16 and R16, 40 watt maximum. 30 degrees maximum tilt. Bulb sold separately.

Don't be put off by the slightly gruesome "eyeball" moniker. This trim option gives you the flexibility of being able to swivel and tilt the light for specific lighting purposes. An attractive finishing touch for Halo's H99 housing series.--Josh Dettweiler

What's in the Box
Adjustable eyeball, die-cast trim

Halo 5-Inch Glass Dome Shower Light Trim, Satin Nickel #5054SNS

The 5054SNS is a nice way to finish Halo fixtures installed in shower stalls. It's wet-listed, of course, and the trim ring is non-conductive and non-corrosive. And the satin nickel trim would be the perfect complement to typical bathroom fixtures.--Josh Dettweiler

Shower light (glass dome and trim)

LLF LED LR6 Recessed Lighting Fixture 6" downlight module - Incandescent Color 2700K

The LR6 6" LED Downlight Module Lighting Fixture from LLF is the extreme long-life and extreme energy-saving LED downlighting fixture that produces the equivalent of 65 Watts of comparable incandescent lighting. Yet it consumes just 12 Watts. It's a perfect choice for new construction or upgrading the downlighting in your energy-efficient home or workspace. The LLF Downlight Module is designed to easily install in standard 6"downlight housings from the majority of manufacturers. Unlike any fluorescent, the LR6 contains no harmful mercury. Experienced lighting engineers and designers also know that compact flourescent blubs often performs poorly and burns-out quickly in downlight fixtures. The LR6 lasts more than 20 years under normal use. That makes life simplerespecially in hard-to-reach installations.

Halo 4-Inch Non-IC Recessed Light Housing for Remodels #H99RT

Looking to install discreet accent or task lighting in existing construction? Halo's H99RT is a great option. It's small, four-inch aperture is unobtrusive, and you can select from a variety of trims to match your décor, finish, and lighting purposes.

Halo makes installation easy with an array of useful features. The H99RT can be installed from below the ceiling using the included remodel clips (these accommodate 1/2- and 5/8-inch ceiling materials). The fixed-position porcelain socket with screw shell provides consistent lamp positioning, and three "Quick Connect" connectors eliminate the need for separate wire nuts.

While this unit is not IC-rated, you can install with insulation as long as you keep it at least three inches from the housing. For safety, the fixture includes a self-resetting thermal protector that deactivates the fixture if it overheats.

Available with a variety of trim options (sold separately). UL damp location and feed-through rated; CSA certified; IP rated. (Looking for a similar lamp for new construction? See Halo's H99T.)--Josh Dettweiler

What's in the Box
Four-inch-aperture housing

Cooper Lighting One-Light 6-Inch Recessed Ceiling Light Fixture Kit with IC Housing #P101ICW

The beauty of this Cooper Lighting recessed kit is that you no longer have to guess which housing belongs with which trim - the can and trim come packaged together. This combined packaging greatly simplifies the often confusing process of selecting recessed lighting.

The P101ICW kit combines 7-1/4-inch diameter white open trim with 6-inch IC-type housing. The light is thermally protected and listed for damp locations making it ideal for use in a variety of applications in new construction, remodels, or suspended ceilings. The IC housing allows you to install the light in direct contact with insulation, making this light kit ideal for top-story installations. In addition, direct contact with insulation results in energy-efficient minimization of heat loss around the can, which can potentially save money in heating costs. It is also approved for through branch circuitry (connecting fixtures in a series). A combination of several recessed light kits can be used to brightly illuminate an entire room, or single lights can be strategically placed as task lighting in areas such as the kitchen, home office, or laundry room.

Captive bar hangers which expand to accommodate joist spans of up to 24 inches are included for suspended ceilings or new construction. Light uses 75-watt R30 or 75-watt PAR30 bulb (not included). UL regulated for safety.--Bree Norlander

What's in the Box
Housing, white trim, expandable captive bar hangers, four remodeling clips, and instructions

Halo 6-Inch Specular Clear Reflector Cone Trim #426

The 426 reflector cone allows you some flexibility--not only with the type of bulb you use, but also in terms of appearance. You can order custom trim rings, too: the TRM6 line offers you a variety of finish options, and if you cut your opening too large, the oversize trim ring (#OT403) can cover up your mistake. Includes coil-spring retention.--Josh Dettweiler

What's in the Box
Reflector cone, coil springs

Halo 6-Inch Air Tite Trim, White #30WATH

The baffle to end all baffles. The 30WATH offers you energy-efficiency, sturdy metal construction, and compatibility with a variety of lamps and housings. And it looks good, too. Features self-flanged socket supporting trim with torsion spring construction.--Josh Dettweiler

What's in the Box
Baffle, trim, torsion springs