page 1 of 10
B & C Eagle DA17G 1-1/2-Inch by 15 Gauge by 33 Degree to 35 Degree Galvanized Finish Nail (4,000 per Box)
from B & C Eagle
- 15 gauge
- 4,000 per pack
B & C Eagle, 4,000 Count, 1-1/2", 15 Gauge, Galvanized Finish Nail, Fits The Following Nail Guns: Senco SFNI, SFNII, SFN40, FP41XP, FP42XP, Dewalt D51275K, Airy 0565T, 0566T, Porter Cable DA250, DA250A, DA250B, CDA250, Hitachi NT65AA, NT65MA, NT65MA2, NT65MA3, Stanley SDA250K, Max NF550.
B & C Eagle DA25G 2-1/2-Inch by 15 Gauge by 33 Degree to 35 Degree Galvanized Finish Nail (4,000 per Box)
from B & C Eagle
- 15 gauge
- 4,000 per pack
B & C Eagle, 4,000 Count, 2-1/2", 15 Gauge, Galvanized Angle Finish Nail, Fits The Following Nail Guns: Senco SFNII, SFN40, FP41XP, FP42XP, Dewalt D51275K, Airy 0565T, 0566T, Porter Cable DA250, DA250A, DA250B, CDA250, Hitachi NT65AA, NT65MA, NT65MA2, NT65MA3, Stanley SDA250K, Max NF550.
B & C Eagle DA21G 2-Inch by 15 Gauge by 33 Degree to 35 Degree Galvanized Finish Nail (4,000 per Box)
from B & C Eagle
- 2-inch galvanized finish nails
- 15 gauge
- 4,000 per pack
B & C Eagle, 4,000 Count, 2", 15 Gauge, Galvanized Angle Finish Nail, Fits The Following Nail Guns: Senco SFNII, SFN40, FP41XP, FP42XP, Dewalt D51275K, Airy 0565T, 0566T, Porter Cable DA250, DA250A, DA250B, CDA250, Hitachi NT65AA, NT65MA, NT65MA2, NT65MA3, Stanley SDA250K, Max NF550.
One Shot Trigger Tool, 22 Cal
from ITW Ramset / Red Head
- Professional fastening results in a variety of concrete, masonry or steel applications.
- The RS22 is a traditional trigger operated tool.
- Positive barrel and load retention prevents barrel from opening freely
- Powder load automatically ejects after each use.
- Ergonomic design for operator comfort. Heavy-duty all-steel construction.
Powerful single shot, trigger operated powder actuated tool. Made of heavy-duty steel construction. Fastens wood to cement, metal to cement, or metal to metal. Uses standard .22 caliber medium load single shot powder loads. Positive barrel and load retention prevents barrel from opening freely, allowing easy horizontal and overhead fastening. After each use ejects the powder load automatically. Rubber cushioned handle for comfort. SPECIFICATIONS: Pin Capacity: 2 1/2 in (3"w/washer).
Hammer Drive Tool, .22 Caliber
from ITW Ramset / Red Head
- The perfect general purpose tool for concrete, masonry, or steel fastening applications
- Instantly drives fasteners into place with single blow of a one pound hammer.
- Quiet shock absorbing system lowers recoil for operator comfort, & increases life of the tool.
- Positive barrel & load retention prevents barrel from opening freely
- Funnel-shaped handle provides a large target while protecting your hand.
Powerful single shot, hammer driven powder actuated tool. Fastens wood to cement, metal to cement, or metal to metal. Instantly drives fasteners into place with a single blow of a one pound hammer. Uses standard .22 caliber medium load single shot powderloads. Quiet, shock absorbing system lowers recoil for operator comfort. Funnel-shaped handle provides a large target while protecting hands. Positive barrel and load retention prevents barrel from opening freely, allowing easy horizontal and overhead fasting. SPECIFICATIONS: Pin Capacity: 2 1/2 in (3"w/washer).
B & C Eagle DA25SS 2-1/2-Inch by 15 Gauge by 33 Degree to 35 Degree Wire Collated Stainless Steel Finish Nail (4,000 per Box)
from B & C Eagle
- Stainless Steel for durability and smoother driving
- 15 gauge
- 4,000 per pack
- 4,000-pack for extended jobs
- 2-1/2" stainless steel finish nails for: Senco SFNI, SFNII, SFN40, Airy 0565T, 0566T, Porter Cable DA250, DA250A, CDA250, Hitachi NT65AA, & Accuset A250FN
Desa International 98690 Power Driver Fastening Tool
from Jensen Distributing
- Ideal for the contractor and do-it-yourselfers
- Trigger activated for easy operation
- Uses 1/2" 58046, 3/4" 58047, 1" 58048, 1-1/4" 58049, 1-1/2" 58050, 2" 58051, and 2-1/2" 58052 standard pin power fasteners, 3" washered pin power fastener 77563
- , and .22 caliber low velocity power loads
Remington, #490 .22 Caliber Power Driver Fastening Tool, Trigger Activated For Easy Operation, Fastens 1/2" To 2-1/2" Power Fasteners & 3" Washed Power Fasteners, Uses .22 Caliber Low Velocity Power Loads, Blister Pack.
Desa International 29278 .22 Caliber Power Loads
from Desa International
- .22 GRAY POWER LOADS
For use in low velocity powder actuated power hammers. Brass cased. 100 loads per box. No. 29278: 1 light load rate, gray No. 29280: 2 medium load rate, brown No. 29282: 3 heavy load rate, green No. 29284: 4 x heavy load rate, yellow
Desa International 29280 .22 Caliber Power Loads
from Desa International
- .22 BROWN POWER LOADS
For use in low velocity powder actuated power hammers. Brass cased. 100 loads per box. No. 29278: 1 light load rate, gray No. 29280: 2 medium load rate, brown No. 29282: 3 heavy load rate, green No. 29284: 4 x heavy load rate, yellow
Desa International 29282 .22 Caliber Power Loads
from Desa International
- .22 GREEN POWER LOADS
For use in low velocity powder actuated power hammers. Brass cased. 100 loads per box. No. 29278: 1 light load rate, gray No. 29280: 2 medium load rate, brown No. 29282: 3 heavy load rate, green No. 29284: 4 x heavy load rate, yellow
+++
DeWalt DW960K-2 18V 3/8 inch Cordless Right Angle Drill/Driver Kit, 0-500/0-1500 RPM
The DeWalt DW960K-2 is an 18V cordless right angle drill/driver kit that is ideal for driving fasteners or drilling holes into tight spots. The 2-speed range of 0-500RPM and 0-1500 RPM increases the versatility of the cordless drill/driver. Even in lower speed range, the right angle drill/driver delivers 310 in-lbs torque (80 in-lbs in high speed) that can joist fasteners quickly into the toughest materials. The 3/8 plastic sleeve chuck is compatible with most drill bits available. The multi-grip trigger of the DeWalt DW960K-2 right angle drill/driver is three inches longer than conventional angel drills and can be activated with any part of hand, allowing the user to have access to it even in tighter spaces. The variable speed and reversing feature of the tool allow greater control to perform the task accurately and neatly. The right angle transmission with sealed ball bearing adds to the life of the tool. The DeWalt DW960K-2 right angle drill/driver with 320 unit watts out of maximum power is ergonomically designed for heavy-duty applications such as turning large bits and fasteners. It is well balanced with low center gravity, making it steady and comfortable to use. Additionally, the cordless drill/driver is compact enough (18.2 x 5 x 12.9 inches) to fit into any tool bag and lightweight (4.7 pounds) enough to be carried easily on to the jobsite. DeWalt DW960K-2 can work interchangeably with other 18V tools too.
Paslode 902000F Factory Reconditioned IM250II 16-Gauge Cordless Straight Finish Nailer with Impulse Technology
When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM250II is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.75 pounds. Its able to drive 3/4 to 2-1/2 fasteners with ease, making it extremely versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.
Paslode 900600F Factory Reconditioned IM250A 16-Gauge Cordless Angled Finish Nailer with Impulse Technology
When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM250A Factory Reconditioned Finish Nailer is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.9 pounds. Its able to drive 1-1/4 to 2-1/2 fasteners with ease. Tight spots and corners are no problem for the slim, angled design of the Paslode IM250A. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better?Attention International Customers Paslode products cannot be shipped outside of the USA.
Ryobi ZRP230 Factory Reconditioned 18-Volt One+? Cordless 1/4" Impact Driver, 2400 RPM
The Ryobi ZRP230 is a Factory Reconditioned 18V Cordless Impact Driver. The tool drives long screws and big lag bolts with ease by adding rapid impacts to strong torque. These impacts reduce the tendency of big fasteners to stick or seize as they turn. The high-torque motor with 0-2400 RPM (no-load) bit speed delivers the power to drive long screws and bolts into tough stock. This tool is part of Ryobis One+? line, which allows you to only buy the parts you need saving you money.
DeWalt DW055K-2 Factory Reconditioned 14.4V 1/2 inch Heavy-Duty Cordless Impact Wrench Kit, 0-2400 RPM
The DeWalt DW055K-2 is a Factory Reconditioned 14.4V 1/2 inch Heavy-Duty Cordless Impact Wrench Kit. It is part of the DeWalt line of heavy-duty cordless impact drivers and wrenches. The cordless impact driver delivers more torque, faster speed and greater control in a package smaller than cordless drills. Delivering 1550 in-lbs of maximum torque, 0-2400 RPM and 0-3000 BPM, the DW055K-2 is ideal for tightening and loosening large nuts and bolts and driving small and large fasteners into wood, metal or concrete. It measures only 6-1/2 inch long and gets user into tighter spots. The heavy-duty impact mechanism provides the power to tighten and loosen large fasteners while limiting the strain felt on the wrist.
Milwaukee 5211 3" Straight Grinder
A coated spindle housing make this heavy duty, Milwaukee Straight Grinder comfortable to hold on to while delivering a full 11 amps of power and 14,500 RPM. Equipped with a hinged face plate with wing nut fasteners for easy wheel changes, this tool can accept up to 3 inch resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 3/8 inch for use with industry standard accessories for the rated diameter capacity.
Milwaukee 5243 6" Straight Grinder
A coated spindle housing make this heavy duty, Milwaukee Straight Grinder comfortable to hold on to while delivering an extra heavy duty 15 amps of power and 5500 RPM. Equipped with a hinged face plate with wing nut fasteners for easy wheel changes, this tool can accept up to 6 inch resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces, as well as buffing wheels for polishing. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 5/8 inch for use with industry standard accessories for the rated diameter capacity. This tool can be converted to a Tuck Point Grinder by purchasing the appropriate guard and Type 1 wheel.
DeWalt DC830KA 14.4V Cordless 1/2 Inch Impact Wrench Kit
The DeWalt DC830KA 1/2 Heavy-Duty 14.4 Volt Impact Wrench provides a light weight, compact and durable solution for a wide range of light to medium fastening applications. The DeWalt DC830KA offers exceptionally small size just 5-3/4 front to back and with the battery weighs only 3.9 lbs. The DeWalt DC830KA has a DeWalt built; high power motor with replaceable brushes delivers maximum performance, durability and serviceability. The DeWalt DC830KA has a variable speed reversing switch which provides control for both setting and removing fasteners and an electric brake that prevents completely backing out and losing fasteners. Built-in features include a bright LED work light and onboard bit storage. The DeWalt DC830KA features advanced handle ergonomics and is equipped with a textured anti-slip rubber grip for extended user comfort and productivity.
DeWalt DC841KA 12V Cordless 3/8 Inch Impact Wrench Kit
Please note that this item is on backorder until late JulyThe DC841KA 3/8 Heavy-Duty 12 Volt Impact Wrench provides a light weight, compact and durable solution for a wide range of light to medium fastening applications. The DC841KA offers exceptionally small size just 5-3/4 front to back and with the battery weighs only 3.6 lbs. The DC841KA 12 Volt impact wrench has a high speed all-metal transmission that delivers 0-2,400 RPM for increased productivity. The DC841KA has a DeWalt built, high power motor with replaceable brushes that delivers maximum performance, durability and serviceability. The DC841KA has a variable speed reversing switch which provides control for both setting and removing fasteners and an electric brake that prevents completely backing out and losing fasteners. Built-in features include a bright LED work light and onboard bit storage. The DC841KA features advanced handle ergonomics and is equipped with a textured anti-slip rubber grip for extended user comfort and productivity.
DeWalt DC840KA 12V Cordless 1/2 Inch Impact Wrench Kit
The DeWalt DC840KA 1/2 Heavy-Duty 12 Volt Impact Wrench provides a light weight, compact and durable solution for a wide range of light to medium fastening applications. The DeWalt DC840KA offers exceptionally small size just 5-3/4 front to back and with the battery weighs only 3.6 lbs. The DeWalt DC840KA 12 Volt impact wrench has a high speed all-metal transmission that delivers 0-2,400 RPM for increased productivity. The DeWalt DC840KA has a DeWalt built, high power motor with replaceable brushes that delivers maximum performance, durability and serviceability. The DeWalt DC840KA features advanced handle ergonomics and is equipped with a textured anti-slip rubber grip for extended user comfort and productivity. The DeWalt DC840KA has a variable speed reversing switch which provides control for both setting and removing fasteners and an electric brake that prevents completely backing out and losing fasteners. Also featured is a built-in features include a bright LED work light and onboard bit storage.
