Starrett 827A Single End Edge Finder
from Starrett
- Body and contacts are made of tool steel
- Hardened, ground and lapped to close tolerances
- Furnished with a protective case
Edge Finders - Layout & Setup Tools Type: Mechanical Edge Finder End Type: Single Shank Diameter: 3/8 Decimal Head Diameter: 0.200 Head Type: Cylindrical
1/16" 4Fl SE Carbide End Mill
from VME
- Diam. Inches: 1/16"
- Shank Diam.: 1/8"
- Length of Flutes: 3/16"
- Overall Length: 1 1/2"
Solid Micrograin Carbide. Style E700. Made in USA. Single End Center Cutting. 4 Flute.
End Mill Set, 6 Piece 4 Flute
from Import
- 6 piece HSS end mill set
- 4 flute end mills
- Center cutting end mills
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills
- All end mills have 3/8" shank.
The set comes in a wood stand.
Pair of 1" x 2" x 3" Blocks
from VME
- Precision ground. Case hardened.
- Cross-drilling design for extra strength and minimum weight.
- Five tapped holes are provided for clamping.
Precision ground. Case hardened. Cross-drilling design for extra strength and minimum weight. Five tapped holes are provided for clamping (3/8 - 16 in 1-2-3). Heat treated above 48 Rockwell "C"; .0001 to .0003 over allowance for nominal lapping. Squar
1/32" 4Fl SE Carbide End Mill
from VME
- Diam. Inches: 1/32"
- Shank Diam.: 1/8"
- Length of Flutes: 1/8"
- Overall Length: 1 1/2"
Solid Micrograin Carbide. Style E700. Made in USA. Single End Center Cutting. 4 Flute.
Jet 660038/CK-38 52 Piece Clamping Kit w/tray for 7/16-Inch and 1/2-Inch T-slot
from WMH Tool Group
- Metal storage tray can be mounted on a machine or wall
- Stud size: 3/8"-16 T.P.I.
- Includes 6 T-slot nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, and 4 studs at each length(3, 4, 5, 6, 7, 8 in.)
CLAMPING KITS Metal storage tray can be mounted on machine or wall Three complete sets to choose from 52-piece kit includes: Six T-slot nuts, Six Flange nuts, Four Coupling nuts, Six Step blocks, Six Step clamps, Twenty four Studs, four each (3", 4", 5", 6", 7" & 8" lengths)
1-1/2" Cap Economy V Block and Clamp Pair
from Vee Blocks
- Capacity: 1 1/2" dia.
- Size: 1 5/8" x 1 3/4" x 2 3/4"
Hardened and ground steel. All sides are ground square and parallel to each other. Works vertically only. 90 degree V's are ground central, parallel, and square with the ends. Matched in pairs. Economy models are not held to the same tolerance and ha
End Mill Set, 6 Piece 2 Flute
from Import
- 6 piece HSS end mill set
- 2 flute end mills
- Center cutting end mills
- Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills
- All end mills have 3/8" shank.
The set comes in a wood stand.
1" Cap Economy V Block and Clamp Pair
from Vee Blocks
- Capacity: 1" dia.
- Size: 1 3/8" x 1 5/8" x 1 3/4"
Hardened and ground steel. All sides are ground square and parallel to each other. Works vertically only. 90 degree V's are ground central, parallel, and square with the ends. Matched in pairs. Economy models are not held to the same tolerance and ha
3" x 3" x 3" Square Angle Plate
from VME
- Size: 3" x 3" x 3"
Solid faces (no slots). Precision Machined Semi-steel. Accuracy: .002" in 6". 2" thru 8" have 1 rib. 10" thru 12" have 2 ribs.
+++
