Bosch RA1125 7-Piece Router Template Guide Set
from Bosch
- 7-piece tool-free router template guide kit
- Includes most popular template guide sizes; adapter for use with Porter-Cable, Black & Decker, other routers
- Aluminum construction
- Includes Bosch RA1100, RA1103, RA1105, RA1109, RA1113, RA1115, RA1121 template guides; case
- 1-year warranty
7-piece kit includes 6 Bosch tool-free templet guides in most popular sizes - Features: Also includes RA1100 Adapter to allow use w/ Porter-Cable, Black & Decker, or any threaded templet guides - Includes: RA1100 #Template guide adapter * RA1103 #Templet Guide * RA1105 #Templet Guide * RA1109 #Templet Guide * RA1113 #Templet Guide * RA1115 #Templet Guide * RA1121 #Templet Guide - Specifications: Part Number: RA1125, Used on Model No. : 1613, 1613AEVS, 1613EVS, 1614, 1614EVS, 1617, 1617EVS, 1618, 1618EVS, 1619EVS.
All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track
from E. Emerson Tool Co
- T-track accepts all the accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs
- T-track accepts all accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs etc.
- All in one clamps are all the same height the thickness matches 3/4 plywood
- Scale ruler available in metric or inch
- Jaws holes accept accessories:tall jaws wide jaws story sticks
The Single Clamp is a simple and straight forward tool. Most commonly used as a straight edge guide for making clean cuts with your circular saw and router. Other uses include but not limited to; a fence for a table saw and drill press.
The E. Emerson Tool Company A-50 All-in-One 50-Inch Grip Clamp Guide uses edge to edge clamps that are quickly adjustable and low profile, unobtrusive jaws to secure wood while staying out of your way. The tall, wide jaws provide flexibility, and the jaw holes accept steel jaw teeth for use on steel tables, and the scale ruler can be used for metric or inch measurements. The built-in T-track accommodates all manner of accessories, such as router plates, stop blocks, and jigs. The clamp thickness matches 3/4-inch plywood sheets, and a micro-adjustable stop provides superior precision in a tool given 5 stars by Popular Woodworking magazine.
Bosch PR010 Round Subbase for Threaded Temp Guides for Bosch Colt Palm Routers
from Bosch
- Accepts threaded templet guides (not included)Â
- Precision Centering Design allows accurate positioning of bit within subbase and templet guidesÂ
- Smooth, long wearing phenolic constructionÂ
- 5-1/4" diameter
- For use with Bosch Colt Palm Routers
Allows you to easily follow intended cut line when using jigs, templates and other fixtures. Available for standard templates guides (shown) or Bosch template guides.
Bosch RA1054 Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter
from Bosch
- Deluxe router guide; precision fine adjustment control; dust extraction hood with adapter for 1-1/4", 1-1/2" and 35 mm vacuum hoses
- Guides cut along workpiece edge or up to 8 inches from edge; easily converts into circle guide for making circles up to 32 inches in diameter
- Plastic with steel rods; die-cast aluminum additional parts
- Includes router guide, pivot plate, dust extraction hood, vacuum hose adaptor, attachment hardware
- 1-year warranty
Guides cut along the workpiece * Also converts into circle guide - Features: Precision fine adjustment control * Guides cut along the workpiece or up to 8 in from edge * Easily converts into circle guide for making arcs & circles up to 32 in diameter * Includes pivot plate, dust extraction hood, vacuum hose adapter & attachment hardware - Specifications: Part Number: RA1054, Used on Model No. : 1611 series / 1613 / 1615 / 1617 / 1618 / 1619EVS series routers & bases, Sales Pack Quantity: 1.
Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables
from Bench Dog
- Two multipurpose featherboards for holding the stock against the guide fence
- Unique miter gauge slot allows quick removal; perfect for router tables, shapers, band saws, and table saws
- Easy set-up feature; reduces kickback, binding, lifting, and bent blades
- High tech polymer ensures it will maintain its original shape
- Advanced design means no marring to your workpiece
A featherboard is undoubtedly the most underrated router-table accessory of all time. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. The result is a dramatic increase in the accuracy, quality and safety of the cuts.
Now many woodworkers make their own featherboards from scrap lumber, but here's a better, safer option: the Bench Dog 40-011 Feather-Loc Double Featherboard. This popular router-table accessory consists of not one, but two industrial-quality featherboards. The featherboards are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.
The featherboards slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note that Feather-Loc Featherboards can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. -- Joseph Truini
Yukon Tool YTRB24 24-Piece Router Bit Set
from Yukon Tool
- Carbide coated razor sharp router bits (set of 24)
- All bits have 1/4-inch shanks
- Set includes VGroove, flush, chamfer, dovetail bits, and more
- Set comes in a protective wood case
24-Pc. Carbide Tipped Router Bit Set for smooth, precision-finish cuts. PRICED LESS! Carbide steel, one of the hardest materials ever developed by man! The tough carbide tips are precision ground to ultra-close tolerances, for decorative edges, moldings, grooves, tight-fitting wood joints and more. These quarter-inch Bits are long-lasting, perfectly balanced and a pleasure to use. Set includes: 4 roundovers: 1/8", 3/16", 1/4" and 3/8"; 3/8" and 1/4" coves; 5/32" Roman ogee; 1/4" slot cutter; 3/8" trimming; 1/2" mortise; 1/2" and 3/8" dovetail; 1/2" combination bevel; 1/2" 90-deg. V-groove; 45-deg. chamfer; 1/2" flush trim; 3/8" and 1/2" round nose; 4 straight: 1/4", 3/8", 1/2" and 3/4"; 1/4" panel pilot; 1/2" rabeting; All labeled in a hinged 12 x 6 x 2 1/4" hardwood case. Get one complete industrial-quality Set. Order ONLINE right away! Yukon Tool 24-Pc. Carbide Router Bit Set
Porter-Cable 42690 Edge Guide (for Models 100, 690, 691, 693, 891, 892, 893 Routers)
from Porter-Cable
- Router edge guide; dual sliding, lockable mounts; fine-adjust knob; fractional and metric scale
- Fits Porter-Cable router models 100, 690, 691, 693, 891, 892, and 893
- Durable anodized extruded aluminum construction
- Includes 1 router edge guide and 2 pins
- Maximum extension when attached to router is 8 inches; 1-year limited warranty
Used to guide the router via the edge of the workpiece.
Porter-Cable 4212 12-Inch Deluxe Dovetail Jig
from Porter Cable
- Quick and easy set-up with alignment lines and bit depth stop
- Durable and user-friendly with the ability to cut through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados
- Built with a thick steel base and CNC machined aluminum templates
- Included: dovetail/box combination template, bits, nuts, template guide and manual
- Use with routers with ½ collet
Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados. Patented alignment lines and router bit depth stop allow for quick, easy set-up Handles stock from 1/4" to 1-1/8" thick and up to 12" wide
Comes with easy-to-mount, heavy-duty steel base; half-blind and dado template, through and box template, dovetail bit, straight bit, two template guides, two lock nuts and T-handle hex wrench. Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood. CNC machined aluminum templates provide superior accuracy. For use with routers with 1/2 collet.
Porter-Cable 42999 1/4-Inch Self Releasing Collet
from Porter-Cable
- Converts 1/2-inch to 1/4-inch
- Use for replacement
- One unit assembly
- Auto-release design
Fits the following Porter Cable Routers: 690 Series, 890 Series, 7518, 7539
Dremel 692 6-Piece Router Bit Set
from Dremel
- Rout, inlay and mortise in wood
- Rout other soft materials
- Do not run in excess of 30,000 RPM
Used for routing inlaying and mortising in wood and other soft materials. Use with #330 Router Attachment and #5231 Shaper/Router Table. Packaged in a reusable plastic storage case. Includes No.612 piloted bending; No.615 corner rounding; No.617 core box; No.618 chamfer; No.650 and 654 straight.
Route, edge, mortise or inlay with this versatile set of bits made just the right size for rotary tools. They're made of high-speed steel, a step down from the preferable carbide tips, but they're plenty tough enough to do the job. You'll find endless uses for the straight bits, and the piloted edge bits with add that extra class to any wood project. It's a nice assortment, we think, and only lacks a nice, classic Roman ogee. How about it, Dremel?--Kris Jensen-Van Heste
+++
