Yukon Tool YTRB24 24-Piece Router Bit Set
from Yukon Tool
- Carbide coated razor sharp router bits (set of 24)
- All bits have 1/4-inch shanks
- Set includes VGroove, flush, chamfer, dovetail bits, and more
- Set comes in a protective wood case
24-Pc. Carbide Tipped Router Bit Set for smooth, precision-finish cuts. PRICED LESS! Carbide steel, one of the hardest materials ever developed by man! The tough carbide tips are precision ground to ultra-close tolerances, for decorative edges, moldings, grooves, tight-fitting wood joints and more. These quarter-inch Bits are long-lasting, perfectly balanced and a pleasure to use. Set includes: 4 roundovers: 1/8", 3/16", 1/4" and 3/8"; 3/8" and 1/4" coves; 5/32" Roman ogee; 1/4" slot cutter; 3/8" trimming; 1/2" mortise; 1/2" and 3/8" dovetail; 1/2" combination bevel; 1/2" 90-deg. V-groove; 45-deg. chamfer; 1/2" flush trim; 3/8" and 1/2" round nose; 4 straight: 1/4", 3/8", 1/2" and 3/4"; 1/4" panel pilot; 1/2" rabeting; All labeled in a hinged 12 x 6 x 2 1/4" hardwood case. Get one complete industrial-quality Set. Order ONLINE right away! Yukon Tool 24-Pc. Carbide Router Bit Set
MLCS Woodworking 15 Pc. Carbide-tipped Router Bit Set, 1/2" shank
from MLCS
- Quality, carbide-tipped bits
- Great Value! Only $2.66 per bit
- Wood Storage Box Included
- 1/2" Shank
- Perfect, economical, all-purpose starter set for your woodworking hobby.
High quality carbide-tipped set includes many common sizes and styles: 4 Straight Bits (3/16", 1/4", 1/2", 3/4"), 1 Round Over Bit (3/8"), 1 Cove Bit (1/2"), 1 Roman Ogee Bit (5/32"), 1 45 deg Chamfer Bit, 1 Flush Trim Bit (1/2"), 1 Rabbeting Bit (3/8"), 1 Dovetail Bit (1/2" x 14 degree), 1 V-Groove Bit (3/8"), 1 Hinge Mortising Bit (1/2"), 1 Panel Pilot Bit (1/4"), 1 Round Nose Bit (1/4"), 1 Allen Wrench and 1 bearing to convert Round Over bit into Beading bit. Sturdy wood storage box also included.
Dremel 692 6-Piece Router Bit Set
from Dremel
- Rout, inlay and mortise in wood
- Rout other soft materials
- Do not run in excess of 30,000 RPM
Used for routing inlaying and mortising in wood and other soft materials. Use with #330 Router Attachment and #5231 Shaper/Router Table. Packaged in a reusable plastic storage case. Includes No.612 piloted bending; No.615 corner rounding; No.617 core box; No.618 chamfer; No.650 and 654 straight.
Route, edge, mortise or inlay with this versatile set of bits made just the right size for rotary tools. They're made of high-speed steel, a step down from the preferable carbide tips, but they're plenty tough enough to do the job. You'll find endless uses for the straight bits, and the piloted edge bits with add that extra class to any wood project. It's a nice assortment, we think, and only lacks a nice, classic Roman ogee. How about it, Dremel?--Kris Jensen-Van Heste
Yukon Tool YTRB100 Carbide Router Bit Set with Bonus Wooden Case, 100-Pieces
from Yukon Tool
- High grade carbide, high performance heat treated, anti kick-back design router bits
- Bonus wooden storage case comes with picture and description of each bit so you can easily locate what you need
- Get a professional finish on any project without the high investment
- Razor sharp 600 grit grind carbide tips and 0.01mm accuracy; electronically balanced for super smooth run that is vibration free
- Anti stick coating cuts through all types of woods and composites to make for smoother cutting and faster run times
Freud 97-210 3-Piece Cabinet Door Router Bit Set
from Freud
- Allows the woodworker to build doors with true mortise and tenon construction for rock-solid joints
- Cuts all composition materials, plywood, hardwood, and soft wood
- Made from micrograin carbide
- Features anti-kickback design for safety; multi-axis grinding for burn free cuts
- Designed for use on table-mounted portable routers
This ogee raised panel bit set includes a backcutter with the smooth cuts of Freud's patented 2+2 technology, which combines two small wings that cut downward and two large wings that shear upward for an extremely smooth cut in hardwoods, softwoods and even plywoods This revolutionary design is combined with a backcutter so that, in one step, you can create a flawless raised panel door that is flush with the frame on both sides Designed for use with a 1/2" shank table-mounted router with 3/4" stock. All bits have 1/2" Shanks. Includes attractive wooden storage box. Applications: Cuts all composition materials, plywood, hardwood, and soft wood. Use on 1/2" shank table-mounted portable routers. Includes the following bits: 99-571, 99-261
The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.
About Freud's Industrial Bits
Serious woodworkers choose serious accessories. They choose Freud. The Freud name equals quality, precision and craftsmanship. Freud router bits feature TiCo Hi-Density Carbide for maximum cutting life and are individually balanced; providing a cut above the rest. When you're looking for a serious router bit, look for Freud red.
 |
About This 3-Piece Door Bit Set
The Freud 3-Piece Door Bit Set combines the popular rail and stile bits with 2+2 raised panel bits. This set allows the woodworker to build doors with true mortise and tenon construction for rock-solid joints that last a lifetime. These MicroGrain carbide bits cut all composition materials, plywood, hardwood, and soft wood. They feature an anti-kickback design for safety, multi-axis grinding for burn free cuts, a Perma-shield coating to resist heat, and a shear angle design that produces a truly superior finish. This set is designed for use on 1/2-inch shank table-mounted portable routers, and it includes bits 99-571 and 99-261 -- plus an attractive wooden storage box.
Applications
This bit set features two small wings that cut downward and two large wings that shear upward, for an extremely smooth cut in hardwoods, softwoods and even plywoods. This revolutionary design is combined with a backcutter so that, in one step, you can create a flawless raised panel door that is flush with the frame on both sides
Warranty
These bits are covered by Freud's limited lifetime warranty.
Fein 43033087065 SCREW SET - MSXE 636-2
from Fein
- 1 pad screw/washer, 1 blade screw/washer
(1 pad screw/washer, 1 blade screw/washer)
50pc Carbide Tipped 1/4" Shank Router Bit Set
from Workshop Tools
- Workshop Tools router bits are made to our specifications and exacting tolerances.
- Highest quality micro-grain carbide blades
- Precision ground 1/4" shanks.
- Satisfaction is Guaranteed.
Workshop Tools router bits are made to our specifications and exacting tolerances. Highest quality micro-grain carbide blades cut evenly and smoothly in even the hardest woods and laminates. Anti kickback full bodied, bite limiting castings are carefully machined smooth and epoxy powder coated for smooth cool operation at high speeds. Precision ground 1/4" shanks. Cuts hardwoods, softwoods, plywood and most composite materials. Carbide tipped blades. 3/16" straight, 1/4" straight, 5/16" straight, 3/8" straight, 1/2" straight, 5/8" striaght, 3/4" straight, 3/8" V-grove, 1/2" V-grove, 1/2" dovetail, 9/16" dovetail, 1/8" core box, 3/16" core box, 1/4" core box, panel pilot, 38" x 1/2" flush trim, 3/8" x 1" flush trim, 1/2" x 1/2" flush trim, 1/2" x 1" flush trim, 3/4" x 1" flush trim, 1/4" rabbeting, 5/16" rabbeting, 3/8 rabbeting, 1/2" rabbeting, 3/8" 45 degree chamfer, 1/2" 45 degree chamfer, 5/8" 45 degree chamfer, 3/4" 45 degree chamfer, 1/4" beading, 3/8" beading, 1/2" beading, 1/4" roundover, 3/8" roundover, 1/2" roundover, 1/4" cove, 3/8" cove, 1/2" cove, 5/32" roman ogee, 7/32 roman ogee, 9/32 roman ogee, 1/4" ogee panel, 3/8" ogee panel, 3/16" ogee flute, 5/16" classic cove, 3/16" wavy edge, 3/16" classical, 1/4" classical, 1/8" double ogee panel, 3/16" double ogee panel, 1/4" double ogee panel. Satisfaction is Guaranteed.
Grip 3 pc Kitchen Door & Drawer Router Bit Set
from Grip-On-Tools
- Use for large routing jobs such as kitchen doors, cabinets, etc.
- C3 tungsten carbide steel tips provide clean and accurate cuts and long term performance.
Use for large routing jobs such as kitchen doors, cabinets, etc. C3 tungsten carbide steel tips provide clean and accurate cuts and long term performance. Fully shielded bearings with 1/2" shanks. Includes 1 pc raised panel bit, 1 pc stile bit, 1 pc rail bit, and 1 pc aluminum storage case.
50-Piece Premium-Grade 1/2" Tungsten Carbide 3-Blade Router Bit Set - 3 and 2 Blade - Aluminum Case
from NEIKO
- Strong, sharp and durable tungsten carbide edges, withstand high-heat and speeds to 20,000 RPM
- Precision-machined high-carbon steel 1/2" shanks provide strength without brittleness
- 3-blade bits in the most-popular sizes (see description for complete listing)
- Complete with custom-fit aluminum carry and storage case to keep all organized & easy-to-find
Includes all of these quality bits: Three-blade: straight: 1/2, 5/8 and 3/4"; flush-trim: 1/2" x 1"; slot-cutter: 1/4, 5/16, 3/8 and 1/2". Two-blade: Double Roman: R1/8, R3/16 and R1/4; flush trim: 3/8" x 1/2", 3/8" x 1", 1/2" x 1/2", 3/4"; 45-degree chamfer: 3/8, 1/2, 5/8 and 3/4"; corner round: R1/4, R3/8 and R1/2"; beading: R1/4, R3/8 and R1/2"; cove: R1/4, R3/8 and R1/2"; Roman Ogee: R5/32, R7/32 and R9/32"; panelling: R1/4 and R3/8"; Ogee flute: R3/16"; classical cove: R5/16"; wave-edge: R3/16"; classical: R3/16" and R1/4"; straight: 3/16, 1/4, 5/16 and 3/8"; dovetail: 1/2 and 9/16"; cove-box: R1/8, R3/16 and R1/4"; panel-pilot: 1/4"; V-grooving: 3/8 and 1/2".
Porter Cable 42186 ROUTER SUB-BASE (5 3/4" DIAMETER) for 690, 890 Series Routers
from Porter Cable
- Standard center hole 1-1/8"
* Standard center hole 1-1/8"
+++
TD Industrial 10143 36pcs Router Bits Set, 1/4in Shank, Wood Case
36pcs Router Bits Set, 1/4 Shank
TD Industrial 10141 20pcs Router Bits Set, 1/2in Shank, Wood Case
20pcs Router Bits Set, 1/2 Shank
TD Industrial 10144 15pcs Router Bits Set. 1/4in Shank, Wood Case
15pcs Router Bits Set, 1/4 Shank
Makita 3621 1-1/4 HP Plunge Router, 24000 RPM, 7.8 Amps
The Makita 3621 is a 1-1/4 HP Plunge Router. Its contoured handle design with built in switch means more precise routing. The router features a 0 - 1-3/8 inch plunge depth capacity with presetting of 3 plunge depths. A rugged polycarbonate housing and nonmarring base means stability and a scratch-free workpiece. Uses standard 1/4 inch shank router bits. The Makita 3621 is double insulated and comes complete with a plastic tool case for convenient storage of tools and accessories.
Wilton Router Bits — 15-Pc. Set
Bits feature extra-fine micrograin carbide tips. Includes a variety of popular shapes. 1/4in. shanks. Carry case.
Makita By Amana 733336-A 1-5/8 Inch 2 Piece Ogee Stile and Rail Router Bits
The Makita 733336-A is a 2-piece stile and rail router bit set that includes two complete assemblies consisiting of cutter, arbors, and bearings.
Milwaukee 48-66-0985 1/4Inch Router Collet
The Milwaukee 48-66-0985 is a 1/4 router collet. The collet is a replacement collet for previous Milwaukee router models 5610, 5620, 5650, 5660, 5670, 5680, 5681 and 5682 to secure 1/4 shank router bits for precision routing.
Milwaukee 48-66-1010 1/2Inch Router Collet
The Milwaukee 48-66-1010 is a 1/2 router collet. The collet is a replacement collet for previous Milwaukee router models 5610, 5620, 5650, 5660, 5670, 5680, 5681 and 5682 to secure 1/2 shank router bits for precision routing.
Makita By Amana 733328-A 1/2-Inch Handrail/Table Edge Router Bit
The Makita 733328-A are special router bits used for cutting table top edges or used with handrail side profile bits.
Porter-Cable 380B120 Bearing Kit Router Bit
The Porter-Cable 380B120 is a Bearing Kit for Router Bits. The kit allows to vary the depth of rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
