Freud 99-001 1/2-Inch to 1-1/4-Inch Door Lip Router Bit with 1/2-Inch Shank
from Freud
- Kickback reducing design
- Individually computer balanced
- Precision ground for the smoothest cuts
- Covered by Freud's limited lifetime warranty
Produces classical door lips on stock from 1/2" to 1 1/4" in thickness. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on table-mounted portable routers.
Freud 99-002 12-Degree Door Lip Router Bit with 1/2-Inch Shank
from Freud
- Kickback reducing design
- Individually computer balanced
- Precision ground for the smoothest cuts
- Covered by Freud's limited lifetime warranty
Cuts out the underside portion of a cabinet door to match most top edge profiles.Provides maximum design versatility. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on hand-held and table-mounted portable routers.
Door Edge Router Bit
from MLCS
- Quality Carbide-tipped Router Bit
- Professional Door Edges in a Single Pass
- Perfect Addition to any Cabinet Door Set
- Satisfaction Guaranteed
- FREE Shipping in the Contiguous USA
2 flute, carbide-tipped. Ideal addition to any cabinet door set. Finish your door edges professionally in one pass. 1-1/2" Large Diameter, 15/16" Carbide Height. 1/2" Shank. For Stock Thickness 3/4" to 7/8".
Door Lip Bit, 1/4'' Radius x 1'' Height x 1/4'' Shank
from Rockler
- K10 and K20 grade carbide for clean cutting action.
- Final sharpening with 600 - 800 grit diamond wheels.
- Precision balanced for smooth operation.
- Baked-on anti-stick coating to reduce pitch and resin buildup.
- 100% Satisfaction Guarantee.
Available in either 1/4" or 5/16" radius roundover. A fantastic value on high quality router bits, these bits are competitively priced while offering high performance and long life. These larger bits are designed to be used in a router table.
Specifications:
1/4" Radius Door Lip Bit
Rockler #: 92079
Cutter Width: 1-1/4"
Carbide Height: 1"
Shank Dia.: 1/4"
Shank Length: 1-1/4"
Radius: 1/4"
Rockler #: 92090
5/16" Radius Door Lip Bit
Cutter Width: 2"
Carbide Height: 1-1/4"
Shank Dia.: 1/2"
Shank Length: 1-1/2"
Radius: 5/16"
Door Lip Bit, 5/16'' Radius x 1-1/4'' Height x 1/2'' Shank
from Rockler
- K10 and K20 grade carbide for clean cutting action.
- Final sharpening with 600 - 800 grit diamond wheels.
- Precision balanced for smooth operation.
- Baked-on anti-stick coating to reduce pitch and resin buildup.
- 100% Satisfaction Guarantee.
Available in either 1/4" or 5/16" radius roundover. A fantastic value on high quality router bits, these bits are competitively priced while offering high performance and long life. These larger bits are designed to be used in a router table.
Specifications:
1/4" Radius Door Lip Bit
Rockler #: 92079
Cutter Width: 1-1/4"
Carbide Height: 1"
Shank Dia.: 1/4"
Shank Length: 1-1/4"
Radius: 1/4"
Rockler #: 92090
5/16" Radius Door Lip Bit
Cutter Width: 2"
Carbide Height: 1-1/4"
Shank Dia.: 1/2"
Shank Length: 1-1/2"
Radius: 5/16"
Door Lip Router Bit with Radius and Angled Rabbet
from MLCS
- Quality Carbide-tipped Router Bit
- Professional Door Edges in a Single Pass
- Perfect Addition to any Cabinet Door Set
- Satisfaction Guaranteed
- FREE Shipping in the Contiguous USA
2 flute, carbide tipped. Ideal addition to any cabinet door set. Finish your door edges professionally in one pass. 1-7/8" Large Diameter, 1-1/4" Carbide Height. 1/2" Shank. For Stock Thickness 3/4" to 1-1/4".
Door Lip Router Bit with Round Over and Ogee
from MLCS
- Quality Carbide-tipped Router Bit
- Professional Door Edges in a Single Pass
- Perfect Addition to any Cabinet Door Set
- Satisfaction Guaranteed
- FREE Shipping in the Contiguous USA
2 flute, carbide tipped. Ideal addition to any cabinet door set. Finish your door edges professionally in one pass. 1-1/4" Large Diameter, 1" Carbide Height. 1/2" Shank. For Stock Thickness 3/4" to 1".
Flush-Cut Door Trimming Bit
from Rockler
- 3/4'' diameter.
- 2'' height.
- 1/2'' shank.
Carbide-tipped cutter handles all thicknesses of doors up to 2" thick. With top bearing for better visibility when using a handheld router.
Many features contribute to the high performance and longevity of this bit, including:
* Final sharpening with 600-800 grit diamond wheels.
* Precision balanced for smooth operation.
* Baked-on anti-stick coating to reduce pitch and resin build-up.
* 100% Satisfaction Guarantee.
Freud # 99-063 No Lip Door Edge Bit, 1-3/4 Dia. x 5/8'' H x 1/2'' Sh.
from Freud
- Precise shear angles provide a splinter-free finish.
- Cuts all composition materials, plywoods, hardwoods, and softwoods.
- Use on hand-held and table-mounted portable routers.
Application: Create a decorative inverted ogee profile on the face of door fronts. Designed to compliment the profile formed on the face of the door created by the Freud 99-064 Finger Pull Door Edge Bit.
Specifications:
Rockler #: 30430
Freud #: 99-063
Overall Dia.: 1-3/4"
Carbide Height: 5/8"
Large Radius: 9/32"
Small Radius: 5/64"
Shank Dia.: 1/2"
Overall Length: 2-5/8"
Freud 99-007 Door Pull Router Bit with 1/2-Inch Shank
from Freud
- Kickback reducing design
- Individually computer balanced
- Precision ground for the smoothest cuts
- Covered by Freud's limited lifetime warranty
Produces the finger pull groove found on popular contemporary cabinet doors. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on hand-held and table-mounted portable routers.
+++
