Freud FI102 Replacement 4-Inch 8 Tooth Blade For Freud And Other Biscuit Joiners
from Freud
- Replacement blade for the JS100 or JS102 joiner
- Eight tooth replacement blade
- Kickback Reducing Design
- Covered by Freud's limited lifetime warranty
Freud UP230 Radius Back Cutter For 5/8-Inch Stock 1-1/4 Bore Freud Raised Panel Cutters
from Freud
- Thick micrograin carbide tips
- Kickback reducing design
- Covered by Freud's limited lifetime warranty
Freud UP201 Raised Panel Shaper Cutter For 5/8-Inch Stock, 1-1/4 Bore
from Freud
- Thick micrograin carbide tips
- Kickback reducing design
- Covered by Freud's limited lifetime warranty
Freud EC-044 1/4-Inch And 1/2-Inch Radius Quarter Round Shaper Cutter, 3/4 Bore
from Freud
- Thick micrograin carbide tips
- Kickback reducing design
- Covered by Freud's limited lifetime warranty
Freud EC-270 Bead Profile Interior Door Rail & Stile Shaper Cutter Set, 3/4-Inch Bore
from Freud
- Thick micrograin carbide tips
- Kickback reducing design
- Covered by Freud's limited lifetime warranty
Grizzly C2041 Shaper Cutter - Glue Joint, 3/4" Bore
from Grizzly
- Cutter Dia.: 2-5/8"
- Cutting Length: 1-1/8"
Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection.
Freud EC-144 3-Wing 3/4-Inch Straight Edge Shaper Cutter, 3/4 Bore
from Freud
- Thick micrograin carbide tips
- Kickback reducing design
- Covered by Freud's limited lifetime warranty
Freud UP170 1/8-Inch 6-Wing Groove Cutter For Shaper, 1-1/4 Bore
from Freud
- Thick micrograin carbide tips
- Kickback reducing design
- Covered by Freud's limited lifetime warranty
MICROPLANE 1" AND 2" ROTARY SHAPER AND SLEEVE PLUS FOLLOWER SET
from Peachtree Woodworking
- Set includes: 1 ea - 1" & 2" Rotary Shaper & 1" & 2" Replacement Blade PLUS Follower.
- Follower allows you to mill multiple units of the same configuration.
- The follower fits both the 1" & 2" rotary shapers.
- Works great with drill press, razor sharp teeth that cut 10 times faster than similar shaping tools.
- 2500 RPM MAXIMUM Speed - Not designed for use with router.
The MicroPlane Rotary Shaper is an excellent tool for shaping anything that you would use a belt sander or a drum sander for. This tool pulls off stock in chips, not dust, keeping the air clear and leaving a nice look on your stock. It also drops chips from the bottom of the tool. When using the follower, it allows for repeatability as the woodworker can trace the same pattern using this bearing follower which fits both the 1" & 2" rotary shapers.
Amana SC442 Stile & Rail Cabinet Door Shaper Cutter Sets - 3/4" Material Thickness; Ogee Profile
from Amana
- 3-Wing,Carbide Tipped; 3/4" Material Thickness; Ogee Profile; 3/4" Bore; 3/16", 5/16" Radius
- 1" Cutting Height; 2-11/16" Overall Diameter; 1/4" Width x 7/16" Depth Tongue
+++
