DEWALT DW7350 Planer Stand with Integrated Mobile Base
from DEWALT
- Mobile planer stand with four wheels
- Pre-drilled to accommodate any DEWALT planer; supports all benchtop planers
- Made of rugged, durable, heavy gauge steel and medium density fibreboard; assembly required
- Includes mobile base, stand, hardware, MDF top, and shelf
- 30 by 24.2 by 6.9 inches; 57 pounds; 3-year warranty
There are lots of options for mounting a benchtop planer, but this is one of the best. While it's predrilled precisely for DeWalt planers, a few seconds with a drill fixes that problem. It's made of rugged, durable, heavy-gauge steel and assembles fairly easily in under an hour. When locked, the unit's rock-stable, but just trip the pedal that engages the wheels and you're moving. It's the perfect stand for the home woodworker because when you're done planing, you can move the unit out of the center of the room and store it against a wall effortlessly.--Kris Jensen-Van Heste
Planer Stand, For Use With #DW733, 734 & 735 Planers, Durable & Stable Under Heavy Loads, Easy Movement & Storage Of Planer & Stand, Includes Mobile Base, Stand, Hardware, MDF Top & Shelf.
DEWALT DW7352 Replaceable Knives for DW735 13-Inch Planer
from DEWALT
- Made of M2 laminated tool steel
- Disposable and reversible knives for the DW735n 13-inch planer
- Easily fit onto the knife locating pins machined on a DW735 cutter-head
Dewalt, 13", Disposable, Reversible Thickness Planer Knives, Fit The DW735 13" Portable Thickness Planer True Value #882-126, Made Of M2 Laminated Tool Steel With Machined Locator Holes To Help Users Align Knives On Cutter Head During Knife Change.
Delta 36-136 Universal Miter Saw Stand
from Delta
- Fully adjustable infeed and outfeed rollers.
- Folds up for easy storage.
- 3 position, pneumatic assisted raising and lowering for the ultimate in flexibility and ease of use.
- Durable tubular steel construction allows for a 200 pound max weight rating
- Ideal for miter saws, table saws, and many other bench top products.
Fully adjustable infeed and outfeed rollers. Folds up for easy storage. 3 position, pneumatic assisted raising and lowering for the ultimate in flexibility and ease of use. Durable tubular steel construction allows for a 200 pound max weight rating. Ideal for miter saws, table saws, and many other bench top products.
Stanley 60582 Folding Sawhorse Twin Pack
from Stanley Hand Tools
- 1000 lb load capacity
- Two sawing grooves included
- Convenient ruler for quick measurements
- Anti-slip rubber on feet and top for safety
STANLEY 060582R FOLDING SAWHORSE TWIN PACK
DEWALT DW723 Miter Saw Stand
from DEWALT
- Heavy Duty Construction
- Supports up to 16-feet of material and 400 pounds
- Aluminum construction; non-marring feet; some assembly required
- Includes 2 convertible work supports/stops
- 75 by 11 by 8.8 inches; 5-1/2-foot beam; 35 pounds; 3-year warranty
Mitre Saw Workstation, Universal Design Works With All Brands Of Mitre Saws, Lightweight Aluminum Construction Allows For Easy Transport To & From The Jobsite, 5-1/2' Beam Extends To Support Up To 16' Of Material & Up To 300 LB, Legs Provide Superior Support & Fold Up For Easy Storage, Work Stops/Supports Can Be Repositioned Quickly Anywhere Along Rail, Non-Marring Feet On Tool Mount Won't Scratch Material, 400 LB Of Support, Includes 2 Convertible Work Supports/Stops.
Tired of transporting a bulky miter saw stand from one job site to the next? The DeWalt DW723 may be the answer. Lightweight and rugged, the all-aluminum stand measures a mere 5-1/2 feet out of the box and weighs in at just 38 pounds. However, when fully assembled, it can support boards up to 16 feet long and a full 400 pounds of weight. The key to its strength lies in the stand's retractable legs, which lock securely in place then tuck away when not in use, as well as its sliding cam-lock extensions, which provide a full 16 feet of length when assembled. A carrying handle makes the stand easy to transport when fully retracted. Just throw it in the back of your pickup and it's good to go. Assembly is quick and easy, too. We had ours up and running in a matter of seconds. Mounting brackets adjust to fit most miter saws, making this the ideal workspace for the professional or do-it-yourselfer on the go. --Carl Thress
Bosch TS2000 Gravity-Rise Wheeled Table Saw Stand
from Bosch
- Gravity-rise wheeled table saw stand with universal mounting slots
- 8 treaded pneumatic wheels for tough terrain
- Heavy gauge 1-1/2-inch steel tubing supports more than 250 pounds of force
- Includes stand, tires, and universal mounting slots
- 24-1/2-inches tall; 66 pounds; 1-year warranty
Gravity-Rise Stand With Wheels, 8" Treaded Wheels & 1-1/2" Heavy Gauge Steel Tubing, Universally Accepts All Brands Of Table Saws, Withstands 250 LB Of Downward Force Per Corner.
Stanley MaxSteel 83-069 Multi-Angle Vise
from Stanley Hand Tools
- Infinite and lockable positioning achieved with swivel-ball design
- Easily attached to most work surfaces with integral screw clamp
- Durable cast-aluminum and steel construction
- Removable jaw pads protect surfaces from marring and damage
Max Steel Multi-Angle Vise, Infinite & Lockable Positioning Achieved With Swivel Ball Design, Easily Attached To Most Work Surfaces With Integral Screw Clamp, Durable Cast Aluminum & Steel Construction, Removable Jaw Pads Protect Surfaces From Marring & Damage.
DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw
from DEWALT
- Folds flat for easy storage and transport
- Heavy-duty tube steel construction maximizes durability under load
- Integral support bar hardware holes secure the saw to the stand
Stand For DW745 Compact Table Saw, Folds Flat For Travel Or Storage, Heavy Duty Tube Steel Construction Maximizes Durability Under Load, Integral Support Bar Hardware Holes Secure The Saw To The Stand, Includes: Hardware Bag, 1 Year Free Service Contract.
Bosch T4B Gravity-Rise Miter Saw Stand
from Bosch
- Patented Gravity Rise System - Rapid set up and breakdown
- 18" Material Capacity - Highest capacity among fully portable units
- 8" Pneumatic Wheels - ease of transport over jobsite terrain
- Rapid Release Tool Mounts - fits most competitors' miter saws (DeWalt, Makita, Hitachi, Ridgid)
- Adjustable Leveling Feet - Stability on uneven surfaces
Setup and breakdown in seconds without removing the saw; Adjustable material supports and repetitive stops; Rapid release universal tool mounts; 8" pneumatic wheels; Adjustable leveling feet; Powder coated 1 1/2" tubular steel; Expansion rails expands material support up to 16 ft.
DEWALT DW7880 Scroll Saw Stand
from DEWALT
- All-metal construction
- One year warranty, One year service contract, 30 day no-risk trial
- Rear leg is adjustable for height
- Fits DeWalt DW788S variable speed scroll saw
DW7880 SCROLL SAW STAND
+++
OTC 1784B 12 Ton Stinger Jack Stands
The OTC 1784B is a pair of 12 Ton Stinger Jack Stands. It has self-locking ratchet handle. It stands conform to ANSI Pald-4 load rating standards and are factory tested before shipment. It has steel base for strength.
OTC 1773C 6-Ton Ratchet Style Jack Stands
-Pair of 6-ton jack stands.-Steel base for strength, self-locking ratchet handle, durable baked enamel finish.-Stands conform to ANSI PALD-4 load rating standard; factory tested before shipment.-Base 11-7/16 x 10.-Height range 15-3/4 to 24.
Wilmar W1605 2 Ton Trolley Jack with Jack Stands
Wilmar W1605 is 2 Ton Trolley Jack with Jack Stands.
Torin Mini Jack Stands Collectible, Model# T40102L
Makes a great addition to your collection or a great gift for the collector who has everything. Perfect for the garage, shop and desktop, too. What a fun way to hold some of your tools. Each measures 2in. x 2in. x 3in.H.
Sunex Tools Oil Drip Pan — Model# 8300P
Ideal for use with transmission jacks and engine stands.
Torin SUV Floor Jack and Jack Stands — 3-Ton Capacity, Model# T83360
Stands have 3-ton capacity. Minimum height: 14in. (stands). Maximum height: 21in. (stands). Lift Capacity (tons): 3, Min. Lift Height (in.): 5, Max. Lift Height (in.): 21, Safety Valve: Yes, Dimensions L x W x H (in.): 24 2/5 x 9 9/20
"Torin Big Red Aluminum Jack Stands — 3-Ton, Model# T43004"
"Pair of 3-ton adjustable jack stands features a patented design that offers lightweight mobility with the strong aluminum tubing and an extra-large, cast aluminum base. Flanged top support makes positioning easy. All-anodized finish.3-ton capacityMinimum height of 10 3/4in.Maximum height of 15 5/8in. 5-hole adjustment is secured with a locking bearing"
"Torin Big Red Service 3-Ton Jack Stands Combo, Model# T83536"
"Dual pump raises vehicles 5 times faster than standard jacks. Lifts to an incredible 22in. - ideal for SUVs - yet has a low-profile height of only 3-1/8in. Complete kit includes jack, pair 3-ton capacity jack stands, pair of wheel chocks and kneeling pad. Wide-load wheels add extra stability."
Hein-Werner Automotive HW93503 - 3 Ton Jack Stands - Sold in Pairs
Saddle column provides ratchet action height adjustmentDual purpose handle serves as carry handle and saddle column releaseMulti position ratchet bar provides strength and durabilityFormed base adds stability and helps reduce sinkage into pavementSold in Pairs only
OMEGA Lift Equipment 32225 - 22 Ton Truck Stands Pin Style
Sturdy, welded steel construction for superior safety and strenghtHeavy gauge, steel frame helps prevent distortion or twisting
