Table Saw Stands

Bosch TS2000 Gravity-Rise Wheeled Table Saw Stand

Gravity-Rise Stand With Wheels, 8" Treaded Wheels & 1-1/2" Heavy Gauge Steel Tubing, Universally Accepts All Brands Of Table Saws, Withstands 250 LB Of Downward Force Per Corner.

DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw

Stand For DW745 Compact Table Saw, Folds Flat For Travel Or Storage, Heavy Duty Tube Steel Construction Maximizes Durability Under Load, Integral Support Bar Hardware Holes Secure The Saw To The Stand, Includes: Hardware Bag, 1 Year Free Service Contract.

Rousseau 2700XL Saw Stand For Makita 2703, Hitachi C10RA, DeWalt DW744 Table Saws

Benchtop table saws have come a long way in the past few years, evolving into precision machinery for even the finest joinery. Here's a stand that's worthy of those little dynamos. It's preset for several models of Makita, Hitachi, DeWalt, and Delta, but it's easily adapted for saws with tops up to 24-1/2 inches deep and 27 inches wide. This is by far the sturdiest benchtop accessory we've seen, with the best array of options. At a great working height of 34-1/2 inches, you'll increase your rip capacity to a burly 27 inches and won't have to call your next-door neighbor anymore to give you a hand when you're cutting sheet goods. The fence is tubular steel with an adjustable magnified hairline indicator for superior readability. Something we noticed and really liked on this stand was that the front edge sits just a bit lower than the saw table, so stock slides smooth as silk without catching. The optional add-ons are great, too: the PM2715XL extension adds a router table to your saw and increases rip capacity to an awesome 49 inches. An outfeed table is available, too. And should you need to, the saw removes easily and the stand folds flat for storage and portability. A winner all the way around. --Kris Jensen-Van Heste

This basic stand extends rip capacity to 27 inches while increasing fence accuracy of benchtop table saws. The folding legs bring the saw up to a comfortable working height of 34-1/2 inches. The high-pressure laminate top increases the work surface of the saw by nearly 90%. Setup and breakdown of the unit are extremely quick. Once the saw, fence, and hairline indicator have been calibrated, the line-up system returns the saw to its original setting, ready for use. For use with Makita model no. 2703, Hitachi model no. C10RA, and DeWalt model no. DW744.

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence.

The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible.

Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra's incredible precision will actually show up in your work because the bar won't wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. The dual flip shop stop and Incra's patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment.

Capitalizing on a great idea, the folks a INCRA® have combined their highly successful Miter3000® with the exclusive AngleLOCK® Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw! Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000® specifications.

Rousseau 2600 PortaMax Jr. Table Saw Table Top and Fence System

Rousseau PM2720 PortaMax 18-Inch by 48-Inch Folding Outfeed Table for PM2600 Table Saw Stand

Fits model No. 2700XL and No. 2775 table saw stand. 18" x 45" surface with HPL laminate. Folds flat.

Rousseau 2775 Table Saw Stand

The Rousseau PortaMax 2775 Table Saw Stand is specifically designed to fit the Bosch 4000, DeWalt 744, Porter-Cable 3812 and Rigid TS2400 portable table saws. This stand includes an accurate, fully-adjustable T-square fence, rips to 27-inch, and provides the user with a comfortable 34-1/2-inch working height. Just remove your saw from the stand and it quickly folds for easy transportation and storage. With professional grade laminate and heavy-duty, powder coated steel construction, this stand will last a lifetime guarranteed! Saw not included.

Dewalt #DW7052 Chrome Heavy Duty Material Clamp

Chrome Heavy Duty Material Clamp, For DeWalt Miter Saws.

The DeWalt DW7052 Material Clamp for DW705 Miter Saw is designed for use with the DW705 miter saw. The DW7052 is constructed from heavy-duty chrome for durability and a long clamp life. This product clamps the workpiece against the miter saw fence and holds it in place for safe, precise cuts, and is backed by a 1-year warranty and service contract.

Rousseau 2715XL Extension with Router Plate (For PM2700XL)

Extension with Router Base Plate. Accessory for PM2700XL. Increase stands rip capacity to 49 inches while adding routing capability. Includes router base plate.

Bosch TS1000 Table Saw Portable Folding Stand

Folding Portable Table Saw Stand, Designed For Use With S-B #4000 Table Saw, Sets Up In Seconds & Folds Up For Storage.