Grizzly G7943 12 Speed Heavy-Duty Bench-Top Drill Press
from Grizzly
- Approx. shipping weight: 160 lbs.
- Motor: 3/4 HP, 110V
- Range of speeds: 140, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM
- Spindle taper: MT #2
- Swing: 14"
All the features and dependability of an expensive industrial grade drill press - with a price tag that's astoundingly low. Includes built-in light (bulb not included).
Grizzly G7944 12 Speed Heavy-Duty 14" Floor Drill Press
from Grizzly
- Motor: 3/4 H.P., single-phase, 110V
- Number of speeds: 12
- Range of speeds: 140, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM
- Spindle travel: 3-1/4"
- Swing: 14"
This heavy-duty Floor Model Drill Press is the mainstay in any shop with 12 speeds and powerful 3/4 HP motor.
Grizzly G0540 Single Spindle Boring Machine
from Grizzly
- Motor: 3/4 HP, 110V, 12 Amp, single-phase, TEFC, 3450 RPM
- Table size: 14 1/4" W x 8 1/4" D
- Table travel, front to back: 4 1/8"
- Table travel, side to side: 6"
- Table travel, vertical: 2 1/8"
How many times have you wished for a simple horizontal boring machine to drill accurate holes into the edges of flat lumber for doweling, hardware alignment or basic mortising? Well, your wish has been answered with this Single Spindle Horizontal Boring Machine. 5/8" drill bit capacity. Direct drive power transfer. Approximate shipping weight of 160 lbs.
OTC 7402 Universal Outside Thread Chaser
from OTC
- Restores threads to their original condition
- Replaces V-pads and dies
- 6 dies to achive the following threads per inch: 4, 5, 6, 7, 7 1/2, 8, 9, 10, 11, 11 1/2, 12, 14, 16, 18, 20 and 24
1 1/4in. to 5in. O.D. capacity. Easy to use. U.S.A.
Grizzly G9969 Radial Drill Press
from Grizzly
- Drill chuck: 5/8"
- Motor size: 1 H.P., Single Phase
- Number of speeds: 12
- Range of speeds: 200-3000 RPM
- Swing: 45"
Designed by us, this drill press is very popular with both wood and metalworking shops that have bulky projects. Head swivels 360 deg and tilts 45 deg left and right. Swing is a huge 45" (you can drill in the middle of a 45" diameter round piece) and spindle can be brought close to the column with the uniquely designed swivel post. Slots in table allow you to use a variety of clamping devices.
Proxxon 38128 TBM Bench Drill Machine
from Proxxon
- 110-120V, 65HZ, 85W comes with 6 steel collets size 1/32, 1/16, 5/64, 3/32, 7/64 and 1/8 inches (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 millimeter)
- Recommend clamp work pieces with Proxxon Machine Vise number 28132 or 24260
- Convert this machine into a high precision machining center with use of 24256 Proxxon KT 70 Micro Compound Table
- Optional Proxxon Original German Rohm Chuck umber 28122 available
The unit offers a high quality machined work table of ribbed die-cast aluminum (worktable size 8 21/32" x 4 23/32" (220 x 120 mm) providing an adjustable fence with scale. The solid, hard-chromed steel column is 11" high (280 mm) and has a diameter of 3/4" (20 mm). The 110-120V/85W motor, which runs very quiet and has a long life expectancy is built in to the super stable die-cast head of the machine. The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500 rpm allowing triple torque at low speeds. The chrome feed lever has an adjustable depth scale. The spindle is essentially free of play as a result of the 3 high quality ball bearing assemblies. For the insertion of MICROMOT steel collets it is recessed, but also threaded for attaching drill chucks with 3/8" thread (for this option see below the Roehm drill chuck, which we offer as an accessory). The spindle has an extremely high rotational accuracy and a 1 3/16" (30 mm) feed. The quill diameter is 1 1/4" (32 mm) with return spring, the throat depth (column to drill spindle) 5 1/2" (140 mm). The unit provides quick coarse height adjustment of headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" (140 mm). The unit comes with six triple slit MICROMOT precision steel collets for shaft sizes ranging from 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 mm).
Freud 6035L 10 mm Boring Machine Chuck for Nottmeyer and Morbidelli Machines
from Freud
- Thick micrograin carbide tips
- Left hand rotation
- High production industrial grade
- Precision machined for best results
- Covered by Freud's limited lifetime warranty
Freud 6035R 10 mm Boring Machine Chuck for Nottmeyer and Morbidelli Machines
from Freud
- Thick micrograin carbide tips
- Right hand rotation
- High production industrial grade
- Precision machined for best results
- Covered by Freud's limited lifetime warranty
Jet JMD-18 / 350018 Milling/Drilling Machine
from JET
- Hinged belt cover allows faster speed changing
- 9-1/2-by-31-3/4-inch worktable
- 2 hp, 1 phase, 230-volt only motor
- Heavy-duty tapered roller bearins support the spindle
- Stand not included
18in. milling/drilling machine has a 1-pc. cast iron column for added support, extra-large work table, positive quick-stop knob and easy-to-read internal depth gauge. Belt cover has quick-slide latch for faster belt adjustment to change spindle speeds. Heavy-duty tapered roller bearings support spindle for greater tolerance and more accurate drilling depth. 42 1/2in.L x 39 3/4in.W x 43 1/2in.H overall
DELTA 32-325 3/4 Horsepower 13 Spindle Line Boring Machine
from Delta
- Bores multiple holes simultaneously to increase productivity
- Heavy Duty 3/4-hp induction motor for powerful drilling action
- Fully adjustable table and fence for quick and easy set up
- Big 16-by-29-3/4-inch table for ample work support
- Two-year limited warranty on machines, parts, and accessories
Large, 16" X 29 3/4" table provides a full 12" of work space in front of the boring head for boring extra-large boards.Telescoping handle, featured on No.32-325, extends from 16" to 23" for increased leverage when needed; retracts when not in use.Fully-adjustable table and fence assembly features easy-to-read English and Metric scales for quick set-up and accurate boring.No.32-326 Pneumatic Line Boring Machine eliminates the need for manual operation, increasing productivity and operator comfort.Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long workpieces.Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel oring patterns.Adjustable depth stop controls the downward travel of boring head.Heavy-gage, sheet steel support structure has a sturdy steel base with holes for bench or stand mounting.Powerful 3/4HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates.Large-capacity, 13-spindle boring head comes with a see-through spindle guard for safety.
+++
Delta 32-331 Stand for 32-325 or 32-326 Line Boring Machines
The Delta 32-331 is a Stand for 32-325 or 32-326 Line Boring Machines. The stand is made of Steel construction with pre-drilled holes for easy mounting. Plastic feet provide stability. It is used for 32-325 or 32-326 Line Boring Machines.
Delta 32-281 5 mm Left-Hand CT Brad Point Boring Bit for 32-325
Manufactured with precision for quality boring operations. Six 5 mm (.197 inch) L.H. bits required for Delta Line Boring Machine. The bit is designed for use with Delta 32-325 and 32-326 Line Boring Machines. Seven right hand bits and six left hand bits are required for initial set up of the line boring machines. Each bit is precision manufactured for quality and has a carbide tip for long lasting sharpness. The 5 mm size fits standard European-style shelf pins.
Delta 32-280 5 mm Right-Hand CT Brad Point Boring Bit for 32-325
The Delta 32-280 5 mm Right-Hand CT Brad Point Boring Bit is manufactured with precision for quality boring operations. Seven 5 mm (.197 inch) R.H. bits required for Delta line boring machine. The bit is designed for use with Delta 32-325 and 32-326 line boring machines. Seven right hand bits and six left hand bits are required for initial set up of the line boring machines. Each bit is precision manufactured for quality and has a carbide tip for long lasting sharpness. The 5 mm size fits standard European-style shelf pins.
Extreme Engineering: Tunneling Under the Alps DVD
To most of the world, the majestic Alps present a scene of wonder. But to European merchants and truckers, they present a troublesome and costly roadblock. Enter the ambitious AlpTransit Tunnel.At just over 56 miles, this Swiss monster is the longest tunnel in the world. That is, it will be once workers complete this enormous project. Follow a team of miners as they risk death beneath billions of pounds of mountain, slowly but surely carving out massive support and maintenance tunnels. For the main channel, engineers use custom-designed TBMs (Tunnel Boring Machines) – 250 feet long, 33 feet in diameter, with 500-pound drilling heads that pound the rock into submission.But, it's not as simple as digging a hole. In this subterranean world, rock actually explodes, walls crumble, floods erupt and great rivers of mud are seemingly everywhere. Watch as technicians outfit their men with special laser imaging equipment that helps workers forecast potential fractures and cave-ins. Once a section has been dug, concrete walls are thrown up to keep the newly carved portion from collapsing – but if the concrete dries too fast, it implodes under the pressure, and the mountain comes crashing down. It's just another day at the office for the world's most extreme engineers.This title is part of Season 1.
