Neiko USA 5 Speed Mini Drill Press w/Laser Guide
from Neiko Tools USA
5 Speed bench top drill press by Neiko Tools USA. Features: 120 volt, 1/3 HP, 300 Watt, all ball bearing motor, 5 speeds from 620-3100 RPM, belt drive, work table turns, tilts, and is fully adjustable up or down. Built-in laser guide. CSA/CUS Approval. Dimensions: Table: 6.5" x 6.5". Column: 1 7/8", Base: 11" x 7". Height: 24". Weight: 45 pounds. Spindle: Morse taper JT-33 supported by ball bearings. Chuck: 1/2". Spindle Stroke: 2". Includes: depth gauge, assembly tools. Perfect for drilling steel, cast iron, aluminum, brass, wood, or plastic.SKU: 9220S
Jancy Slugger 19040 Holemaker Portable Magnetic Drill (Max Slugger Cutter dia 1-3/8 in x 2 in depth)
from Jancy
- Compact size Only 15 in. high by 7 in. wide. Lightweight at only 30lbs.
- External coolant system.
- Easily converts to accept twist drills up to 1/2 capacity.
- 1-3/8Â diameter through 2Â material
Holes up to 1-3/8 diameter by 2 depth can be produced quickly and efficiently with the Slugger Holemaker. The machine's 1.4 horsepower motor is complemented by a 3/4 arbor bore. The quality and performance are characteristic of machines costing hundreds o
Fein KBM-32Q 1-1/4-Inch Magnetic Anular Cutter includes 1/2-Inch 3 Jaw Chuck
from Fein
- Compact and lightweight--only 22 lbs
- Fein's Quick-In bit change system--also accepts most competitive bits
- 1-1/4" anular capacity , 1/2 twist drill capacity, 3 Jaw Chuck Included
- 440 RPM, 1982 lbs holding power, 10-1/4 inch stroke
- ALL COMPENTS DESIGNED AND BUILT BY FEIN
Milwaukee 4270-20 9 Amp Compact Electromagnetic Drill Press
from Milwaukee
- Powerful 9.0 amp 1.1 max HP motor
- Only 26.5 lbs. with comfortable carrying handle
- Strong two-coil magnet
- Two positions for feed handle - relocate without tools
- Simple two-button control panel - unobstructed by feed handle
For remote drilling in metal, the 4270-20 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools.
BRM 35 Magnetic Drill Blue Rock Roto-Broach
from Blue Rocket
- Drilling Capacity: 7/16-1 1/2 - 2" depth
- Comes with Jacobs Chuck Adapter, Oil Bottle, Safety Chain and Steel Box
Specifications: o Drilling Capacity: 7/16-1 1/2 o Drilling Depth: 2 o Tool Holder: Direct Arbor with ¾ Weldon Shank o Motor Data: 110V/AC 60Hz o Speed: 570 Revolutions per/min o Magnetic Adhesion: 2600 ft/lbs o G. W.: 44 lbs o N. W.: 28 lbs o Stroke: 7.5 o Size: 19 x 15 x 8
Champion Cutting Tool RotoBrute RB32 MiniBrute Magnetic Drill Press-Portable
from Champion Cutting Tool
- 2200-Pound Magnetic Strength, High Torque Hitachi D13 Motor 550rpm
- 3/4-Inch Arbor with 1/2-Inch Jacobs Drill Chuck
- 3-1/2-Inch Diameter X 1-3/8-Inch Depth Cutter Capacity, 6-Inch vertical travel.
- Cuts ferrous & Non-Ferrous Metals
- Application examples include: Steel fabrication, Bridge & highway maintenance, truck & trailer manufacturing, Construction sites, Mining, ship building, refineries, welding, etc.
DEWALT DW151 Heavy-Duty 6 Amp 1/2-Inch Magnetic Drill Press
from DEWALT
- .
Milwaukee 4208-1 12.5 Amp Electromagnetic Drill Press with 1-1/4-Inch Motor and No. 3 Morse Taper
from Milwaukee
- 12.5 amp motor
- 1-1/4" drill capacity
- 500/250 RPM no load speed
- Solid state electronic switching
- Feedback speed control
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
3" Drill Press Vise
from Liberty Forge
3" drill press vise that fits the "mini" or "benchtop" drill presses. This vise bolts right on to the work table, and allows you secure whatever you are drilling. This item is a must have if you own a drill press. Dimensions: 5.5" (W) x 6.5" (L) x 2" (H)Jaws Open: 3"Mounting Holes: 4.5" ApartSKU: 1346F
Champion Cutting Tool RotoBrute AC35 Economy Magnetic Drill Press-Portable
from Champion Cutting Tool
- 2200-Pound Magnetic Strength, High Torque 1200w Motor and 600-Pound No-Load Speed
- Quick Release Arbor Enables Cutter Change in Seconds
- 1-3/8-Inch Diameter X 2-Inch Depth Capacity, 6-1/2-Inch vertical travel
- Cuts Ferrous & Non-Ferrous Metals
- Application examples include: Steel fabrication, Bridge & highway maintenance, truck & trailer manufacturing, Construction sites, Mining, ship building, refineries, welding, etc.
+++
