Rotary Tools

Dremel 761-03 7,000/14,000 RPM Cordless Pet Nail Grooming Rotary Tool

The rotary action of this tool comfortably, and safely, trims your pets nails. 6,000/12,000 RPM, 6 volts of power. Two speeds for light duty precision jobs. Operates on 4 AA batteries (not included). Includes Dremel unit, one 1/4 in. sanding drum, and four 1/4 in. coarse (60-grit) sanding sleeves

It's a rare human who actually enjoys clipping a dog's nails; and rarer still, the dog who enjoys it. Enter Dremel's cordless groomer, a quiet, battery-powered rotary tool that gently grinds down your pet's nails without cutting.

We happen to know a particular hound named Sophie who's endured more than her share of cracked nails and bleeding nail beds, the result of the standard guillotine-type nail trimmers. Though she was a bit wary of the Dremel, she sniffed at it and decided it was harmless. Then we set it on the floor and turned it on.

Sophie seemed concerned for a minute, but then lost interest. We let her get used to the sound of the Dremel for a few minutes, then got down to business. We expected her to cringe and pull away when we took paw in hand, for what usually follows is not pleasant for her. She submitted reluctantly at first to the Dremel, probably expecting the worst, but once we distracted her with a piece of rawhide, she forgot about the nail hubbub and let us carry on.

The whole thing was quick and painless, which made a change for Sophie, and was actually kind of soothing for the humans, which definitely made a change for us.

We followed the advice in the manual and alternated between two paws at a time, not keeping the abrasive on any nail for more than a couple of seconds, and we made sure each nail was cool before grinding it a second time.

If we had a criticism, it would be to wish only that Dremel would include the ½-inch drum for larger dogs like Sophie as well as the smaller one. Other than that, it's a tail-wagger. --Kris Jensen-Van Heste

Dremel 750-02 Minimite 13,000 RPM 2 Speed 4.8-Volt Cordless Rotary Tool

Designed for drilling, sanding, shaping, detailing and other light-duty jobs, this compact, go-anywhere, use-anytime tool comes in extremely handy in and around the house. It features two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank.

We started counting all the uses for this little dynamo, but we stopped at 967. We like it for delicate tasks and finer work because it isn't as powerful as its big brothers, so it's easier to control. It's light, extremely maneuverable, the switch is exactly where you want it and heck, it's just plain fun to use. It's perfect for jewelry, electronics, tiny woodworking crafts like dollhouse furniture and other intricate hobbies. It uses Dremel's wide array of bits, so there's virtually no limit to what you can do with this. Sure, there are store brands on the market for less, but Dremel is king when it comes to rotary tools, and we think they outdid themselves with this one.--Kris Jensen-Van Heste

Dremel MultiPro Cordless 7700-02 20,000 RPM Two-Speed 7.2V Rotary Tool System w/50 Accessories

Ready to go on a minute's notice, this two-speed cordless tool and the 50 included bits are perfect for a wide variety of do-it-yourself jobs inside or out. Capable of doing almost anything the standard MultiPro does - except plug into an electrical outlet or accept attachments - you'll want to keep it charged up and handy at all times.

Built for the do-it-yourselfer, Dremel's cordless MultiPro kit delivers the versatility you expect from a Dremel--with the added advantage of being cordless. Lightweight at only 9 ounces, this compact unit maneuvers comfortably in tight spaces. What will you use it for? Remove old grout in your bathtub, polish your flatware, remove a broken tile, etch glass, hang miniblinds, cut out a pet door, install a new car stereo, sand off a spot of hard-to-reach rust, clean your boat's outboard engine parts, refinish ornate woodwork, install a mortise lock, and much, much more. The kit comes with 50 bits, including a high-speed cutter, a bristle brush, a cutoff wheel, sanding discs, a felt polishing wheel, a grinding wheel, and more--all the tools you need to tackle projects around the home. The tool's ball-bearing shaft affords minimal vibration. The shaft-lock button and unique knurled collet nut make changing bits easy, too, with no wrench required. A three-hour battery charger and a carrying case are included. --Jon Groebner

Dremel 300-N/55 300 Series 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 55 Accessories

300 SERIES VS ROTARY TOOL KIT 55

Dremel 3956-02 MultiPro Super 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 77 Accessories

While there are a number of rotary tools on the market made by a host of different manufacturers, the Dremel Moto Tool is the one they all strive to copy. Dremel's MultiPro variable-speed model is great for a huge range of projects, from home improvement tasks to hobbies and crafting. It has a continuously adjustable speed range from 5,000 to 35,000 rpm, which allows the user to effectively work with materials as soft as balsa wood and as hard as ceramics. The flexible shaft that comes with this model is great for working in tight spots many rotary tools can't touch. The kit also comes with an assortment of accessories and a handy carrying case. Others may copy it, but Dremel has been making rotary tools so long they've come close to perfecting the idea. --Brian Trinen

Dremel 8000-02 10.8-Volt Lithium Ion Cordless Rotary Tool

Remember how cool we all thought that first Dremel was? We're reliving the feeling with this one: lighter, faster, smarter, better, and stronger. The main improvement over the last generation is the battery source: lithium-ion. There are so many reasons to applaud. Lithium holds its charge up to six times longer in storage than nickel-cadmium batteries, so it's ready when you are. Remember the disappointment when you were ready and your battery was low? That won't happen with this one. It's got a battery fuel gauge that tells you how much life is left before a recharge, so you won't be caught without your Dremel, and if you choose to keep it on its charger, you won't cause memory and shorten the charge capacity. It's small, it's light, it's comfortable and maneuverable; it's everything the corded models are, but without the cord. We love it.--Kris Jensen-Van Heste

Higher speeds 5,000 35,000 rpm, same as Dremel corded models. High capacity 10.8V Lithium Ion battery pack for longer run times. Battery fuel gauge lets you know when its time to recharge. Variable speed to handle a greater range of applicat

Dremel 290-01 1.15 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template

Dremel 764-04 Pumpkin Carving Kit includes 6-Volt Minimite Cordless Rotary Tool and 10 Templates

Even the least artistic among us can have the coolest jack-o'-lanterns in the neighborhood this year with Dremel's pumpkin- carving kit. It's a neat, buzzy little unit that carves off layers of pumpkin flesh to let the light glow through. It isn't meant to cut all the way through the pumpkin, and the effect is perfectly spooky. Powered by four AA batteries, it's got two speeds for superior pumpkin-stock removal, 6,000 and 12,000 rpm, so it's not a child's toy.
	Step 1 Use a knife to cut a lid for your pumpkin. Angle the knife towards the center of the pumpkin as you cut so that the lid will rest on top of the pumpkin after the cut has been made. Use a large spoon to clean out the entire inside of the pumpkin. It is best if the walls of your pumpkin are approximately 1/4- to 1/2-inch thick.
	Step 2 Based on the size of your pumpkin, you can enlarge or reduce the size of your template using a copy machine if needed. Using spray-on adhesive, apply your template to the pumpkin.
	Step 3 Turn the tool on low and begin tracing the areas to be removed. You can use the high setting for large area material removal. The key is to remove approximately the same amount of material on your whole pumpkin to achieve a uniform depth.
	Step 4 Once you've finished, remove the paper template, place a light source, such as a candle, in the pumpkin, dim the lights, and see how well the light shines through your carving. If you want more light to shine through, turn the lights back on, remove the candle and remove additional material from your pumpkin.
	Printable Templates from Dremel Click the thumbnail picture to bring up a printable PDF version.
What's in the Box 6-volt Dremel cordless rotary tool (requires 4 AA batteries, not included) 10 carving templates 1/8-inch diameter high-speed cutter (Dremel high-speed cutter no. 191) Wrench

Black & Decker RTX-6 2 Amp 3-Speed Rotary Tool with 30 Accessories and 2 Spring Clamps

The Black & Decker 3-speed rotary tool is created with a high-torque 2 amp motor so it finishes jobs quickly and efficiently -- without bogging down under the load. Versatile, rugged, and loaded with convenience features, this hardy rotary tool will make short work of all your fine detail jobs, craft projects, workshop and household tasks.

The RTX-6 boasts an exclusive Flip-Lock spindle lock system for quick and easy accessory changes, eliminating the need to hold down an awkward button as you try to switch heads. And you'll have a lot of heads to choose from -- because the universal collet system accepts all standard rotary tool accessories. So don't worry about buying special bits, tips, or attachments. This tool accepts any rotary tool add-on you can think of, so the number of potential applications is almost limitless.

This outstanding tool offers three speed settings for maximum precision and versatility, no matter the project. With speeds -- 12,000/24,000/30,000 rpm -- you can customize the power to the project at hand; and the separate 3-speed dial means you can set it and forget about it. Also, the rubber overmolded grip keeps your hands comfortable and your accuracy high, because a tool that's easy to hold is easy to maneuver. This kit includes 30 different accessories, two spring clamps, and a box to keep it all together and organized. -- Cherie Priest

Applications:
The RTX-6 is ideal for an immense variety of jobs. It cuts, sands, grinds and carves; it cleans, polishes, engraves, sharpens and drills. This rotary tool smoothes and shapes work pieces, removes rust and corrosion from old metal, and even creates drywall cut-outs. Use it around the home, in the workshop, or anywhere else.

What's in the box:
Black & Decker rotary tool, 30 accessories, soft-sided carry case with accessory compartment, user guide, and wrench.

Factory-Reconditioned RotoZip RZ20-2100-RT Premium Cut-Off Kit

RotoZip RZ20-2100-RT RotoZip Factory-Reconditioned Pro Cutoff Kit with Worklight RZ20-2100. Features 5.5 Amps 15000-30000 RPM 3 jaw chuck eliminates use of collets - Industry 1st Quick easy and wrenchless bit changes New designed body Redesigned tool body has internal ribbed supports to provide added structural integrity to prevent issues of fan slippage and spindle lock failures Dust sealed switch Prevents switch failure from dust contamination and excess buildup Plastic adjustable foot Made of high strength plastic adjustability allows for a depth of cut up to 1 quick release latch provides for easy positioning and removal Quick release detachable handle A strong and robust handle that is easy to remove and replace depending on the user's preference Soft grip body for all-day comfort Enhances the feel of the tool's body and provides hand comfort when using the tool for long periods of time Variable speed control Provides precise control of cutting speed when cutting a variety of materials Metal bezel Provides added structural support for the spindle lock button Integrated LED Worklight Illuminates the rotating bit provides improved sight of the cutting area. Includes RotoZip Pro Cutoff Kit with Worklight - RZ20-2100 ZipMate ZM3 Cutting Attachment Masonry Cut-off Wheel Metal Cut-off Wheel Dry-Diamond Cut-off Wheel Circle Cutting Guide Attachment Bit Accessory Pack Soft Carry Bag.