Jigs

Incra IMS2 24-Inch Incra Miter Slider

Eliminate difficult and time-consuming setup operations while maintaining accuracy and repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs.

Available in 24" and 18" lengths.
Works with any standard 3/8" x 3/4" miter slot.

Miter Slider comes with FREE illustrated plans to make popular table saw jigs, such as the miter jig shown above. Includes illustrated plan to make a crosscut box, which firmly supports the stock off the table surface for a smooth cut while maintaining a perfectly square cut.

Kreg Pocket Hole Screws #2 Square Drive Coarse Washer Head-PARENT

Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables

A featherboard is undoubtedly the most underrated router-table accessory of all time. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. The result is a dramatic increase in the accuracy, quality and safety of the cuts.

Now many woodworkers make their own featherboards from scrap lumber, but here's a better, safer option: the Bench Dog 40-011 Feather-Loc Double Featherboard. This popular router-table accessory consists of not one, but two industrial-quality featherboards. The featherboards are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.

The featherboards slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note that Feather-Loc Featherboards can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. -- Joseph Truini

Kreg SML-F125-1000 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack

Designed for use in pocket hole joinery. Washer head provides greater screw seat area, preventing crushed pockets & run through in particle board and softer woods. Self-tapping auger points provide easy installation and minimal splitting. The dri-lube finish reduces friction for easy installation and protects from rust. Fine thread screws recommended for screwing into hardwoods.

The Kreg 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head is ideal for 3/4-inch thick hardwood work pieces. The washer head prevents overdriving in pocket bottoms, which is especially critical in composite and plywood work pieces. The self-tapping type 17 auger tip eliminates the need to predrill, and its larger diameter steel shank creates a nearly unbreakable screw. The bronze-colored finish and dry-lubricant coating improves driving torque and rust resistance. This pack includes 1,000 hole screws.

Kreg KJD Replacement Twist Step Drill Bit for Kreg Manual Pocket Hole Systems

The 1 piece design eliminates clogging and provides a much smoother and faster drilling stroke than the drill bits with replaceable center drills. The KJD bit for our manual pocket hole jigs is made of high speed steel that increases the bit's life.

The Kreg KJD Replacement Drill Bit is designed for pocket hole joinery. It has a small tip with a clearance hole for the screw shank and a large diameter that makes a flat-bottom hole for screw heads. This bit is recommended for use with corded high-rpm drills.

Porter-Cable 4212 12-Inch Deluxe Dovetail Jig

Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados. Patented alignment lines and router bit depth stop allow for quick, easy set-up Handles stock from 1/4" to 1-1/8" thick and up to 12" wide

Comes with easy-to-mount, heavy-duty steel base; half-blind and dado template, through and box template, dovetail bit, straight bit, two template guides, two lock nuts and T-handle hex wrench. Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood. CNC machined aluminum templates provide superior accuracy. For use with routers with 1/2 collet.

Jasper 200J Model 200 Circle Cutting Jig for Plunge Router

If you're a speaker builder, then you need this tool! Introducing the Jasper Audio Circle Jig precision router attachments. These jigs convert your plunge router into a precision circle cutting device. The Model 200 will cut circles and mortises in 1/16" increments from 2-1/4" to 18-3/16" in diameter. Model 400 is perfect for tweeters and small midranges, cutting holes from 1" to 7-1/2". This makes it the ideal tool for creating highly accurate cutouts in custom built speaker cabinet baffles. Designed for use with MDF, plywood, particle board, solid woods and plastic sheet. Mounts directly to the base of 19 different models of plunge routers including Bosch 1613 and 1615, DeWalt 621 and 625, Freud FT2000E, Hitachi M8V, TR12 and M12V, Porter Cable 690 series and 7539, Skill 1823 and 1835, and all Sears, Ryobi and Makita models. Made in the U.S.A.

The Jasper 200J Model 200 Circle Cutting Jig for Plunge Router allows you to make the clean circles that are needed in making speaker cutouts. The cutout sizes provided by the jig range in 1/16-inch increments from 2-1/4 inches to 18-3/16 inches. Its easy-to-read scale is calibrated for a 1/4-inch router bit, and this jig has precision-drilled pivot holes that hold pins in selected holes.

General Tools 888 1/4-Inch to 1/2-Inch Dowel Center Transfer Plugs

8 Piece Dowel Center Set, Includes 2 Each: 1/4", 5/16", 3/8" & 1/2" Plated Steel Dowel Centers, Punch Marks Provide Accurate Dowel Hole Alignment.

Wolfcraft 3751405 Dowel Pro Doweling Jig Kit

Sold as each. Cast aluminum. For: 1/4", 5/16" and 3/8" drill bits & dowels. For corner, T-butt and edge to edge joints. Includes: 3 depth stops (1/4" 5/16" & 3/8") and 60 dowel pins (20 each of 1/4", 5/16" and 3/8"). 4 color box. Manufacturer's number: 3751. Buy Hardware Supplies SKU #: 2001881. Country of origin: Taiwan. Distributed by Wolfcraft, Inc.

The Wolfcraft Dowel Pro Doweling Jig Kit features a compact design coupled with durable construction. This cast aluminum doweling jig is ideal for creating edge-to-edge, edge-to-corner and T-joints in materials from 1/2-inch-to-1-1/4-inch thick. Hardened steel bushings in 1/4-inch, 5/16-inch, and 3/8-inch sizes make precision drilling quick and easy. Other features include pre-aligned hole guides with hardened steel bushings, clamps that allow both boards being joined to be drilled simultaneously. This product includes a 5-year warranty.

What's in the Box
Doweling Jig, 2 clamps, 3 depth stops, and 60 dowel pins in assorted sizes from 1/4-inch to 3/8-inch.

Kreg SML-F125-500 1-1/4-Inch #2 Fine Pocket Hole Screws with Pan-Head, 500-Pack

The Kreg 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head is ideal for 3/4-inch thick hardwood work pieces. The washer head prevents overdriving in pocket bottoms, which is especially critical in composite and plywood work pieces. The self-tapping type 17 auger tip eliminates the need to predrill, and its larger diameter steel shank creates a nearly unbreakable screw. The bronze-colored finish and dry-lubricant coating improves driving torque and rust resistance. This pack includes 500 hole screws.