Pacific International Tool & Shear SS404 SteelHead Fiber Cement Cutting Shear
from Pacific International Tool & Shear
- Cuts fiber-cement siding and other materials cleanly and quickly
- Blades last for up to 20 homes
- Beefy 6.5 amp motor for fast cutting
- Most powerful handheld shears on the market
- Precision-machined by computer for consistent cutting and optimal blade angle
Malco TSFC Turbo Shear Fiber Cement Cutting Shear Attachment
from Malco
- Accessory for turning almost any 14.4-volt or higher power drill into a cement shear
- Wide skid plate design stabilizes for precise, clean cuts in fiber cement siding and backerboard up to 1/2-inch thick
- Heat-treated high carbon steel blade and reversible skid plate
- Blade and skid plate are replaceable
- Weighs 3 pounds when shipped
The Malco TurboShear fIber Cement Cutting Shear Attachment turns your power drill into a fiber cement shear. The TurboShear attaches to your existing A/C or cordless drill to go wherever the work is. It makes clean, precise cuts (even in window and door arches) in fiber cement siding and backerboard up to 1/2-inch thick.
Turbo Shear Attachment, Easily Chucks Onto Your Own Drill To Create A Fiber Cement Siding Cutting Shear, Navigates For Window & Door Arcs, Fits Most 14.4V Or Larger Cordless Or Standard A/C Power Drills For Easy Operation Anywhere On The Job Site, Wide Skid Plate Design Stabilizes For Precise, Clean Cuts In Fiber Cement Siding & Backerboard Up To 1/2" Thick, Heat Treated High Carbon Steel Blade & Reversible Sid Plate Assures Long Service Life.
Malco FCMS 5-Inch to 8-Inch Exposure Facing Gauge and Overlap Gauge Set
from Malco Products
- Facing gauge and overlap gauge set provides 2 popular tools for fiber cement siding work
- Allows for easy and accurate 1-person siding installations
- Durable nylon facing gauge adjusts to 5-, 6-, 7-, and 8-inch exposures without tools
- Overlap gauge supports one end of plank; can be removed without siding damage
- Set includes 1 facing gauge and 1 overlap gauge
The Malco FCMS Facing Gauge and Overlap Gauge Set offers two popular tools for fiber cement siding -- a facing gauge and an overlap gauge. The fiber cement facing gauge is used to accurately measure the exposure of the siding and guard against sagging, it can be set to exposures of 5, 6, 7, and 8 inches. This facing gauge is easily adjusted without the need of tools or fasteners, and it can be held with one hand when steadying a new plank for nailing. The facing gauge is made of tough, long-lasting, weather-resistant nylon. The metal overlap gauge is used to support one end of a plank and give it the proper overlap, a pair of overlap gauges can be used to support the entire plank if desired. This overlap gauge can be removed without damage to the siding. When used in combination, the facing gauge and overlap gauge allow you to prop up one end of the plank for easy and accurate 1-person installation of fiber cement siding.
"MALCO PRODUCTS, INC. " SIDING TOOL Use while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging May also be used in combination with the Malco overlap gauge to prop up one end of the plank for one-person application More accurate and easier to use than home-made wood "preacher" blocks Adjustable for precise 5", 6", 7", or 8" exposures Gauging block easily snaps in to desired exposure position without use of tools or fasteners Easily held with one hand while steadying new plank for nailing May be used with Overlap Gauge for 1-person application Manufactured of tough, long-lasting, weather-resistant nylon material throughout Carded
Makita JS8000 Fiber Cement Shear
from Makita
- Fiber Cement Shear
- 6.5Amp Heavy Duty "Makita Built Motor"
- 0-2500 RPM
- Retractable Hook allows user to get into tight places
- 1/2" Protected Spindle Withstands Heavy Torque Loads from the Powerful Makita Built 6.5 Amp Motor
Includes Fiber Cement Shear Kit (Variable Speed) - JS8000, Center Blade (725129-8), (2) Side Blades (725130-3), 15/32" Hex Wrench (783221-6), Tool Case (824780-2), Operating Manual.
DEWALT D28605 Heavy-Duty 1/2-Inch Variable Speed Cement Shear
from DEWALT
- Powerful, 6.5 Amp, all ball-bearing motor for increased power and long life
- Head swivels 360° for added cutting convenience
- Variable speed for increased user control
- Reversible dual cutting edge side blades for longer cutting life and increased productivity
- Replaceable center and side blades for longer cutting life and increased productivity
6.5A Motor With Overload Protection, Cement Siding Shear, 1/2", Cutter Head Capacity, 360 Degree Swivel Head, Reversible Dual Cutting Edge Side Blade, 0-2,500 SPM, Rubber Trigger & Handle.
Campbell Hausfeld PL151999AV 16 Gauge Pnuematic Nibbler
from Campbell Hausfeld
- At 3,900 strokes per minute, provides the cutting power to cut up to 16 gauge steel.
- Designed to cut intricate patterns in sheet metal and aluminum without leaving burrs.
mfr: Campbell Hausfeld
Air Nibbler. This item can not be shipped to Puerto Rico and APO/FPO addresses..
AIR COMPRESSORS & TOOLS Campbell Hausfeld Air Products>
Tapco 11989 Snap Stand Wheel Kit
from Tapco
- Allows for easy transport of Snap Stand
- Easy to attach
- 10" Pneumatic tires
- Steel hub
Pneumatic wheel accessory kit for use with the Tapco Snap Stand.
DEWALT DC490KA Heavy-Duty 18 Gauge 18 Volt Cordless Swivel Head Shear Kit
from DEWALT
- Head swivels 360º which allows user to access tight quarters while maintaining comfort
- Cuts 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts
- Minimum cutting radius of 5.5"
- For use in cold rolled steel 18-28ga.
- Cordless tool allows user to take the tool to the work piece
Features: Head swivels 360º which allows user to access tight quarters while maintaining comfort. * Cuts 7/32 strip which continuously curls out of the cutting area providing consistent and accurate cuts. * Cordless tool allows user to take the tool to the work piece. Specifications: * Voltage: 18V * Strokes/Min: 0-2,300 spm * Minimum Cutting Radius: 5.5 * Capacity in Steel: 18-28 ga. Includes: 1 hour charger * (2) 18V XRP batteries * Blade wrench * Heavy-duty kit box
Milwaukee 6852-20 18 Gauge Shear
from Milwaukee
- 6.8 amp Milwaukee motor
- Hex Wrench
The swivel head design is designed with comfort in mind. With its variable speed and 4 amp motor, it handles solid 18 gauge capacity in steel, 20 gauge in stainless. It uses a three blade cutter design to give consistent cuts in a variety of materials.
Pacific International Tool & Shear SS424 "New" Razorbacker Electric Shear
from Pacific International Tool & Shear
- Team up tough Hardibacker "500" with the clean-cutting Razorbacker Shear
Want to make tile installation a snap--without all the clouds of dust and grit to scratch ceramics? Team up super-tough Hardibacker "500" with the incredibly clean-cutting Razorbacker Shear. Based on a 1/2" 7-amp motor, Snapper Shears are the strongest and most powerful fiber-cement handheld shears in the world. The new 400-series Snapper Shears have single-piece aluminum heads precision-machined to .0001" tolerances by computer-controlled milling equipment. This insures that the blades are consistently cutting at the optimum angle to slice quickly and easily through half-inch fiber-cement backerboard. Also, our blades are machined from solid tool steel. Not cast.
+++
