PowerMax 2" Intake 6.5 HP OHV 158 GPM Gas Powered Water Pump (CARB Compliant) #XP652WP
from Power Max
- 1 Gallon Gas Tank/2.4 Hour Run Time
- Back Flow Check Valve
- Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench
- EPA And CARB Approved
- Automatic Low Oil Shut Off
Move Huge Volumes of Water with this Smooth Running, Easy Starting, Long Lasting Pump Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach & more uses. This PowerMax 2" water pump has a Real 2" NPT fitting so you can use your regular hoses on it. Our competitors on eBay do not have the 2" NPT thread, but have metric instead. So when you put your hose on, you have to cut the end off and put a hose clamp on the hose to hold it on to the pump. Not with this pump, it is ready to pump water out and is EPA and CARB approved. This means it is held to the highest standards and meets California high emission standards, along with the rest of the United States standards for motors. Don't be fooled into buying a junk water pump for the same money as ours. It also has an One Year Warranty. You have nothing to lose, only to gain with the PowerMax Water Pump. FEATURES *Durable 6.5 Hp. Air cooled OHV gasoline engine w low oil shutoff and idle control *EPA & CARB approved with 2'' ID intake & outlet w back flow check valve *Pump overhead lift: 91 ft., Suction height: 26 ft *Gallons per minute: 158 gpm. + .6 gallon fuel cap *2.4 hour run time on a single tank of gas INCLUDES intake hose end strainer, threaded hose ends connectors & clamps, tool kit w plug wrench." PowerMax - One Year Warranty & 30 Day Satisfaction Guarantee.Â
Blue Max 6.5 HP Gas Powered 3-Inch Water Pump (Non-CARB Compliant) #3365
from Blue Max
- Inlet and out inside diameter: 3"
- Pump lift(m): 28/92
- suction height(m): 8/26
- Continuous Operating: 2.4 Hours
- This item is not for sale in California/Non CARB compliant
Continuous Operating: 2.4 Hours/ Output height (L/min)(gal/min): 1/264/ suction height(m): 8/26/ Pump lift(m): 28/92
Briggs & Stratton Elite Series 2-Inch 5.5 HP OHV 155 GPM Gas Powered Water Pump (CARB Compliant) #073001
from Briggs & Stratton
- 155 Gallons Per Minute Discharge Capacity with Cast Iron Volute And Impeller
- 4 Quart Fuel Capacity
- Includes Strainer And Couplings
- 52 lbs.
- CARB Compliant
Swisher Shindaiwa E4 34cc 4-Stroke Engine Commercial Grade Water Pump #E4-W4000
from Swisher Mower
- 34cc E4 Hybrid Engine produces 1.4 HP and gives the power and torque of a 4-stroke engine while having the light weight and all position operation of a 2-stroke.
- Fuels like a 2-stroke, using a 50:1 mix, but remains up to 25% more fuel efficient than similar displacement 2-stroke engines. 20 fl oz fuel tank.
- Patented Power Boost Chamber supercharges the engine to give it even more power and torque. 2 ring piston and cylinder is chrome plated for durability and longevity.
- 34.3 GPM, 164 ft total head lift, 26 ft suction lift, and 72 psi max. pressure, 1in. Intake and Output
- One of the most powerful centrifugal pumps in its class, and also allows all angle hillside operability.
PowerMax 4" Intake 9 HP OHV 427 GPM Gas Powered Water Pump (CARB Compliant) #XP904WP
from Power Max
- 1 Gallon Gas Tank/2.4 Hour Run Time
- Back Flow Check Valve
- Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench
- EPA And CARB Approved
- Automatic Low Oil Shut Off
Move Huge Volumes of Water with this Smooth Running, Easy Starting, Long Lasting Pump Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach & more uses. This PowerMax 4" Water Pump has a Real 4" NPT fitting so you can use your regular hoses on it. All of the other sellers on eBay do not have the 4" NPT, but have metric instead. So when you put your hose on, you have to cut the end off and put a hose clamp on the hose to hold it on to the pump. Not with this pump, it is ready to pump water out and is EPA and CARB approved. This means it is held to the highest standards and meets California high emission standards, along with the rest of the United States standards for motors. Don't be fooled into buying a junk water pump for the same money as ours. It also has an One Year Warranty. You have nothing to lose, only to gain with the PowerMax Water Pump. FEATURES *Durable 9.0 Hp. Air cooled OHV gasoline engine w low oil shutoff and idle control * 4'' ID intake & outlet w back flow check valve *Pump overhead lift: 91 ft *Suction height: 26 ft *Gallons per minute: 427 GPM *2.4 hour run time on a single tank of gas *EPA & CARB approved. INCLUDES intake hose end strainer, threaded hose ends connectors & clamps, tool kit w plug wrench PowerMax - One Year Warranty & 30 Day Satisfaction Guarantee.Â
All Power America 5.5 HP OHV 4-Cycle Gas Powered 2-Inch Portable Water Pump (Non-CARB Compliant) #APP6020
from All Power America
- Automatic low oil shutdown
- Pump cleans up shop, home and garden quickly and efficiently
- 2-inch inlet/outlet means quickest possible cleanup
- Cast iron impeller with cast aluminum casing for long, reliable service life
- This item is not for sale in California/Non CARB compliant
Blue Max 2.0 HP Gas Powered 1.5-Inch Water Pump (Non-CARB Compliant) #3459
from Blue Max
- 1.5" Inlet
- Maximum Flow 44 Gallons per Minute
- Total Head Lift 72'
- Max Head Suction 22'
- This item is not for sale in California/Non CARB compliant
Approximate Run Time per Tank of Fuel: 3 hours/ Power: 2.HP 63CC 5:1 Air Cooled 2 Stroke Engine/ Max Head Suction 22’/ Total Head Lift 72?/ 1.5" Inlet/
Blue Max 5.5 HP Gas Powered Water Pump (Non-CARB Compliant) #3164
from Blue Max
- Total Head Lift: 85 Ft
- Displacement: 163 CC
- Discharge Capacity: 150 Gal/min
- Maximum Pressure: 35.5 PSI
- This item is not for sale in California/Non CARB compliant
Discharge Capacity: 150 Gal/min/ Pump Type: Economy Centrifugal, Self-Priming/ Compression Ratio: 8.5:1/ Suction Head Lift: 26 Ft/ Engine: JF168, 5.5 HP, OHV/ Displacement: 163 CC
Briggs & Stratton Elite Series 3-Inch 6.5 HP OHV 246 GPM Gas Powered Water Pump (CARB Compliant) #073003
from Briggs & Stratton
- 246 Gallons Per Minute Discharge Capacity with Cast Iron Volute And Impeller
- 4 Quart Fuel Capacity
- Includes Strainer And Couplings
- 67 lbs.
- CARB Compliant
Briggs & Stratton 6.5 HP* Elite Series I/C OHV Engine Self priming pump Steel cradle ...
Sportsman Series 1.5-Inch 5.5 HP 4-Stroke Gas Powered High Pressure Water Pump (Non-CARB Compliant) #HPWP15
from Sportsman
- Ideal for small farm owners, lawn and pool maintenance and providing water supply in an emergency.
- Has a convenient and compact design.
- Provides maximum water flow up to 65-GPM at 3,600-RPM.
- Self priming pump. Has a port size of 1.5-Inches NPT Threaded.
- 3 hours continuous operation time.
+++
Northern Industrial Tools Plate Compactor With Water Tank and Sprayer
Single-direction plate compactor with water tank and sprayer for use on hot asphalt, sand, crushed aggregate, soil, etc. 4.5 HP OHV cast iron, cylinder-lined compactor with 21in. x 16in. plate features high power and low fuel consumption. Quiet Robin EX-13 engine. Advanced unit with 65ft.-82ft. per minute travel speed and float type carburetor. Transistorized ignition for long-lasting use. Centrifugal flyweight type governor and 12 Volt lighting coil. Bore and stroke of 58mm x 48mm and overall displacement of 126cc. Rated 4.5 kW at 3600 RPM. Truck Ship. HP: 4 1/2, Engine Type: Robin EX13, Bore x Stroke (mm): 58 x 48, Rated Watts (kW): 4.5 kW at 3,600 RPM, Compacting Plate Dimensions L x W (in.): 21 1/4 x 16 1/4, Vibrations Per Minute (VPM): 5,600, Travel Speed (ft. per min.): 65 to 82, Compaction Force (lbs.): 3,527, Compaction Depth (in.): 14 126cc engine Angled combustion chamber for increased power and efficiency Handle moves to a vertical position for use in tight spaces Gas tank strainer and anti-splash device included Optional wheel kit (Item# 999237) sold separately
K-D Tools KD 2521 Fuel Pump Vacuum and Pressure Tester
The K-D Tools KD 2521 is a Fuel Pump Vacuum and Pressure Tester. It test for fuel line pressure and vacuum leaks and check for leaky valves, timing, fuel pump vacuum and pressure and gas line leakage.
"NorthStar Gas Powered Hot Water Pressure Washer with Honda Engine — 4000 PSI, 4 GPM, Skid Style"
"Gas-powered hot water pressure washer is essential when electricity is not convenient or available, and high-power hot or cold water cleaning is needed. 18 HP Honda engine powers the premium CAT direct drive pump to deliver hot water at 4000 PSI f"
NorthStar Gas-Powered Cold Water Pressure Washer — 4000 PSI, 4.5 GPM
Our biggest and best cold water pressure washer! Top of the line quality pressure washers feature Briggs Vanguard 16 HP engine and a belt drive pump. NorthStar™ high performance pressure washers combine the power of quality Briggs Vanguard engines with industrial belt drive pumps that are tested at our factory. Never before has anyone offered this level of performance and quality at these affordable prices! Belt drive system is the longest lasting and quietest system around. Pressure (PSI): 4,000, Flow (GPM): 4.5, Engine: Briggs Vanguard 16 HP, Pump: AR, Drive: Belt, Gun: Industrial rear entry with 28in. lance, Nozzle Type: Quick-connect 0°, 15°, 25°, 40° and soap nozzle, Orifice Size: 4.0, Hose: 50ft. gray nonmarking high-pressure hose with 3/8in. quick-couplers, Cart: Full roll cage with 10&Quot; turf tires, Fuel Capacity (gal.): 6.5, Max. Inlet Water Temp (°F): 140, Max. Output Water Temp (°F): N/A, Fuel Type: Gasoline, Chemical Injector: Yes, Adjustable Pressure: Yes, Engine Oil Type: SAE30 motor oil, Pump Oil Type: SAE30 non-detergent oil, Engine Oil Included: No, Pump Oil Included: Yes, Low Oil Shutdown: Yes, Thermal Protector: Yes, Dimensions L x W x H (in.): 34 1/4 x 31 3/4 x 27 1/4 Electric start with recoil backup 12V DC automotive or marine battery required (not included)
DeWalt D55275R Factory Reconditioned D55275 Heavy-Duty 8-Horsepower 17-Gallon Gas Wheeled Portable Compressor
The DeWalt D55275 is a Factory Reconditioned Heavy-Duty 8 HP 17 Gallon Gas Wheeled Portable Compressor. It delivers a powerful 16.2 cu-ft per minute at 100 PSI and is able to run a variety of pneumatic tools. The portable unit has two wheels for more stable mobility. Its powered by an 8 HP Honda engine with automatic throttle control to conserve fuel when air is not being used. The cast-iron four-cylinder pump is designed and built for longevity.
Water and Trash Pump Strainer — 3in.
Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 3in. round.
Water and Trash Pump Strainer — 2in.
Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 2in. round.
Water and Trash Pump Strainer — 4in. Round
Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 4in. round.
Eastern Tools Portable Generator — 7000 Watts, Gasoline, 13 HP (357cc) OHV, Model# TG7000
This 7kW gas generator from Eastern Tools provides up to 8 hours of power during emergency outages or for construction, agricultural and industrial shop applications. Includes wheel kit for easy mobility. Engine: OHV, HP: 13, Rated Watts: 7,000, Noise Level (dB): 75, Fuel Capacity (gal.): 6, Start Type: Electric, Dimensions L x W x H (in.): 20 x 26 3/4 x 20 1/2 7000 surge Watts; 6700 running Watts 13 HP (357cc) 4-cycle OHV air-cooled engine Low oil indicator light Brushless generator 60Hz Single phase Four 120V AC 20 Amp outlets with GFCI One 120/240V 30 Amp L1430R outlet 50 Amps @ 120V; 22 Amps @ 240V Up to 8 hours run time @ 1/2 load 75dB noise level Includes wheel kit with semipneumatic tires
OTC Gas Analyzer
5-gas analyzer module snaps onto the Genisys, providing another level of diagnostic capability. Covers emission-related diagnosis and provides the ability to test for mechanical failures. OTC# 3780. U.S.A. Factory shipped. Water overload protection keeps fluids from entering the system Automatic zero mode eliminates the need to remove sample probe from tailpipe Meets of exceeds BAR 97, OIML Class O standards Includes module, hose/probe, Gas M-P software, regulator, filters, manual and storage case
